Seretram

Seretram is a food & beverage plant in France with a reported capacity of 811,785,044 USD. It processes food, beverages or tobacco — typically with boilers, cookers and dryers. By capacity it ranks #28 of 173 food & beverage plants tracked in France. It emits about 54,809 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 12,776 cars. Its CO₂ per unit of capacity is about 17% below the median food & beverage plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38480300.

在上下文中：该设施如何比较

在811,785,044 USD时，Seretram是France中food & beverage plant的中位数约 811,785,044 USD。 其单位容量的CO₂约为food & beverage plant中位数的高于 50%。 子部门：food-beverage-tobacco。 作为food & beverage plant，它需要强烈的工艺热量（通常80–200°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 食品和饮料厂使用连续运行的锅炉、炉灶、巴氏灭菌器和干燥机；未隔热管道和容器的热损失直接降低吞吐量和效率。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 54,809 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest food & beverage plants in France

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Seretram sits in a temperate oceanic climate zone (Köppen Cfb), at 43.5°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #28 largest of 173 food & beverage plants in France by reported capacity.

Nearby industrial sites

• Labeyrie · Food & Beverage · 36,510 t CO₂
• Labeyrie Sa - St Geours De Maremne · Food & Beverage · 36,510 t CO₂
• Facylities Multi Services · Textiles · 30,639 t CO₂
• Johanna Mesnage · Food & Beverage · 36,510 t CO₂
• Rayonier Advanced Materials · Pulp & Paper Mill · 108,797 t CO₂
• Celsa France Boucau steel plant · Steel Plant · 46,352 t CO₂

Location

Coordinates 43.55, -0.99. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions