Saab Co., Ltd.

Saab Co., Ltd. is a textile mill in Japan with a reported capacity of 24,062,284 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #15 of 64 textile mills tracked in Japan. It emits about 630 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 147 cars. Its CO₂ per unit of capacity is about 20% above the median textile mill.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38476164.

在上下文中：该设施如何比较

在24,062,284 USD时，Saab Co., Ltd.是Japan中textile mill的中位数约 24,062,284 USD。 子部门：textiles-leather-apparel。 作为textile mill，它需要强烈的工艺热量（通常60–150°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 纺织厂使用工艺蒸汽进行染色、整理和干燥，通常需要在长时间运行期间进行严格的温度控制——持续的热损失会侵蚀利润。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 630 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Japan

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Saab Co., Ltd. sits in a humid subtropical climate zone (Köppen Cfa), at 35.3°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #15 largest of 64 textile mills in Japan by reported capacity.

Nearby industrial sites

• ENEOS Petrochemical Kawasaki, Kawasaki · Petrochemical · 568,011 t CO₂
• JFE East Japan Works (Keihin) steel plant · Steel Plant
• JPN-Kawasaki_ammonia · Chemical Plant · 232,966 t CO₂
• DC Co Kawasaki Cement Plant · Cement Plant · 475,468 t CO₂
• Idemitsu Kosan Keihin Refinery · Refinery · 767,457 t CO₂
• ENEOS Negishi Refinery · Refinery · 1,364,480 t CO₂

Location

Coordinates 35.34744, 139.36407. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions