PKN Orlen SA, Plock

PKN Orlen SA, Plock is a petrochemical in Poland with a reported capacity of 700,000 t of ethylene. It cracks hydrocarbon feedstocks into building-block chemicals such as ethylene and propylene. It is operated by ORLEN SA. It emits about 877,715 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 204,596 cars. Its CO₂ per unit of capacity is about 7% below the median petrochemical.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-18648369.

在上下文中：该设施如何比较

在700,000 t of ethylene时，PKN Orlen SA, Plock 是Poland中petrochemical的中位数约 700,000 t of ethylene。 子部门：petrochemical-steam-cracking。 作为petrochemical，它需要强烈的工艺热量（通常300–800°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 石化厂在非常高的温度下裂化烃，生产乙烯、丙烯和其他基础化学品——是最热强度密集的工业过程之一。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 877,715 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Operator

Operated by ORLEN SA. All facilities by this operator →

Local climate

PKN Orlen SA, Plock sits in a temperate oceanic climate zone (Köppen Cfb), at 52.6°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

Nearby industrial sites

• Orlen Mazovian Petrochemical Plock Refinery · Refinery · 3,270,622 t CO₂
• Płockie Zakłady Drobiarskie "Sadrob" S.A. · Food & Beverage · 35,924 t CO₂
• Zakład Przetwórstwa Mięsa "Olewnik" W. Olewnik Spółka Jawna · Food & Beverage · 35,924 t CO₂
• Zakłady Mięsne "Mat" W Czerniewicach Sp. Z O.O · Food & Beverage · 35,924 t CO₂
• Polmlek Raciąż Sp. Z O.O. · Food & Beverage · 35,924 t CO₂
• Oddział "Cukrownia Dobrzelin" · Food & Beverage · 35,924 t CO₂

Location

Coordinates 52.58516, 19.65001. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions