Home / United States / Non-ferrous metals plants / PHELPS DODGE REFINING CORPORATION

PHELPS DODGE REFINING CORPORATION

Metals Plant in United States. Approximate location 31.76333, -106.38015.

Metals PlantUnited StatesCO₂ reported

PHELPS DODGE REFINING CORPORATION is a non-ferrous metals plant in United States with a reported capacity of 1 unitless. It smelts or refines non-ferrous metals. By capacity it ranks #51 of 330 non-ferrous metals plants tracked in United States. It emits about 99,065 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 23,092 cars. Its CO₂ per unit of capacity is about 116% above the median non-ferrous metals plant.

1unitless
99,065t CO₂e / yr (Climate TRACE)
#682CO₂ rank in United States
99065.00t CO₂ per capacity unit

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673450.

在上下文中:该设施如何比较

在1 unitless时,PHELPS DODGE REFINING CORPORATION是United States中non-ferrous metals plant的中位数约 1 unitless。 其单位容量的CO₂约为non-ferrous metals plant中位数的高于 165%。 子部门:other-metals。 作为non-ferrous metals plant,它需要强烈的工艺热量(通常400–1200°C)来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量,通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%,将表面冷却至≤45°C,投资回收期通常不到2年。 有色金属厂在其熔点以上的炉和坩埚中熔化、精炼和铸造金属;来自未隔热转移和储存容器的损失是显著的。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出;部门角色基于工程参考。

What 99,065 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

23,092cars driven for a year
12,919homes' annual energy use
1,651,083tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest non-ferrous metals plants in United States

ATLANTIC ALUMINA, GRAMERCY OPERATIONS: 1 unitless1ATLANTIC A…NATIONAL CEMENT COMPANY INC.: 1 unitless1NATIONAL C…AM/NS Calvert, LLC: 1 unitless1AM/NS Calv…WVA Manufacturing, LLC: 1 unitless1WVA Manufa…GLOBE METALLURGICAL INC. (0684000105): 1 unitless1GLOBE META…ARCONIC DAVENPORT LLC: 1 unitless1ARCONIC DA…US MAGNESIUM LLC: 1 unitless1US MAGNESI…Almatis Burnside Inc: 1 unitless1Almatis Bu…

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

PHELPS DODGE REFINING CORPORATION sits in a cold desert climate zone (Köppen BWk), at 31.8°N in the northern hemisphere.

~11°Ctypical annual mean
~26°Ctypical warm-season
Cold desert: hot summers and mild winters

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #51 largest of 330 non-ferrous metals plants in United States by reported capacity.

Nearby industrial sites

Location

Coordinates 31.76333, -106.38015. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

  • Up to 96% less heat loss from insulated surfaces
  • Surface temperature down to ≤45°C for worker safety
  • 6× faster maintenance access — removable and refittable
  • Typical payback up to 2 years

See Inzonex process-equipment insulation →

Inzonex modular insulation on industrial equipment

Frequently asked questions

What type of facility is PHELPS DODGE REFINING CORPORATION?

PHELPS DODGE REFINING CORPORATION is a non-ferrous metals plant in United States. It smelts or refines non-ferrous metals.

What is the capacity of PHELPS DODGE REFINING CORPORATION?

PHELPS DODGE REFINING CORPORATION has a reported capacity of 1 unitless.

How much CO₂ does PHELPS DODGE REFINING CORPORATION emit?

PHELPS DODGE REFINING CORPORATION emits about 99,065 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 23,092 cars. That ranks #682 among tracked facilities in United States.

Where is PHELPS DODGE REFINING CORPORATION located?

PHELPS DODGE REFINING CORPORATION is in United States, near coordinates 31.76333, -106.38015.

Built from open public data; no personal information. Operate this site? Request a correction or removal.