Mahgreb Steel Casablanca plant

Mahgreb Steel Casablanca plant is a steel plant in Morocco with a reported capacity of 1,200,000 t of steel. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace). It is operated by Maghreb Steel SA. By capacity it ranks #1 of 4 steel plants tracked in Morocco. It emits about 114,901 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 26,783 cars. Its CO₂ per unit of capacity is about 82% below the median steel plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1566969.

在上下文中：该设施如何比较

在1,200,000 t of steel时，Mahgreb Steel Casablanca plant是Morocco中steel plant的中位数约 1,200,000 t of steel。 子部门：iron-and-steel。 作为steel plant，它需要强烈的工艺热量（通常800–1500°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 钢铁厂在高炉中燃烧煤炭或使用电弧熔化废料；在两种情况下，熔融金属都必须保持在1,500°C以上并通过广泛的热管和容器转移。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 114,901 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest steel plants in Morocco

Reported capacity (t of steel), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Operator

Operated by Maghreb Steel SA. All facilities by this operator →

Local climate

Mahgreb Steel Casablanca plant sits in a hot-summer Mediterranean climate zone (Köppen Csa), at 33.6°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #1 largest of 4 steel plants in Morocco by reported capacity.

Nearby industrial sites

• Shercon S.A.R.L. · Textiles · 9,035 t CO₂
• Marlow Production · Textiles · 9,035 t CO₂
• Kiron S.A. · Textiles · 9,035 t CO₂
• La Cheveche · Textiles · 9,035 t CO₂
• New Wash · Textiles · 9,035 t CO₂
• Crossing · Textiles · 9,035 t CO₂

Location

Coordinates 33.592, -7.47804. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions