Kospro Gmbh

Kospro Gmbh is a textile mill in Germany with a reported capacity of 1,238,695,659 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #11 of 23 textile mills tracked in Germany. It emits about 22,447 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 5,232 cars. Its CO₂ per unit of capacity is about 17% below the median textile mill.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38480058.

在上下文中：该设施如何比较

在1,238,695,659 USD时，Kospro Gmbh是Germany中textile mill的中位数约 1,238,695,659 USD。 子部门：textiles-leather-apparel。 作为textile mill，它需要强烈的工艺热量（通常60–150°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 纺织厂使用工艺蒸汽进行染色、整理和干燥，通常需要在长时间运行期间进行严格的温度控制——持续的热损失会侵蚀利润。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 22,447 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Germany

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Kospro Gmbh sits in a temperate oceanic climate zone (Köppen Cfb), at 52.3°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #11 largest of 23 textile mills in Germany by reported capacity.

Nearby industrial sites

• Cargill Gmbh · Food & Beverage · 151,340 t CO₂
• Salzgitter Peiner Träger Peine steel plant · Steel Plant · 59,812 t CO₂
• Salzgitter Flachstahl steel plant · Steel Plant · 7,944,161 t CO₂
• Nordzucker Ag Werk Clauen · Food & Beverage · 151,340 t CO₂
• Nordzucker Ag, Werk Schladen · Food & Beverage · 151,340 t CO₂
• Hover Cement Plant · Cement Plant · 128,067 t CO₂

Location

Coordinates 52.32499, 10.46551. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions