Pulp & Paper Mill in Poland. Approximate location 54.35697, 18.48561.
Pulp & Paper MillPolandCO₂ reported
Global Cellulose Fibers - Gdansk Modified Fiber Plant - International Paper is a pulp & paper mill in Poland with a reported capacity of 500,000 t of pulp & paper. It turns wood or recovered fibre into pulp and paper, with large steam and drying loads. It is operated by International Paper Co. By capacity it ranks #1 of 3 pulp & paper mills tracked in Poland. It emits about 270,212 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 62,986 cars.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-44375633.
在500,000 t of pulp & paper时,Global Cellulose Fibers - Gdansk Modified Fiber Plant - International Paper是Poland中pulp & paper mill的中位数约 500,000 t of pulp & paper。 子部门:pulp-and-paper。 作为pulp & paper mill,它需要强烈的工艺热量(通常150–250°C)来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量,通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%,将表面冷却至≤45°C,投资回收期通常不到2年。 纸浆和造纸厂为制浆工艺和纸张干燥机发电自己的蒸汽,运行大型锅炉系统,其中热损失直接降低效率。
容量和CO₂强度比较从Climate TRACE工业设施数据计算得出;部门角色基于工程参考。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of pulp & paper), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by International Paper Co. All facilities by this operator →
Global Cellulose Fibers - Gdansk Modified Fiber Plant - International Paper sits in a temperate oceanic climate zone (Köppen Cfb), at 54.4°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #1 largest of 3 pulp & paper mills in Poland by reported capacity.
Coordinates 54.35697, 18.48561. View on OpenStreetMap.
Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

Global Cellulose Fibers - Gdansk Modified Fiber Plant - International Paper is a pulp & paper mill in Poland. It turns wood or recovered fibre into pulp and paper, with large steam and drying loads.
Global Cellulose Fibers - Gdansk Modified Fiber Plant - International Paper has a reported capacity of 500,000 t of pulp & paper.
Global Cellulose Fibers - Gdansk Modified Fiber Plant - International Paper emits about 270,212 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 62,986 cars. That ranks #15 among tracked facilities in Poland.
Global Cellulose Fibers - Gdansk Modified Fiber Plant - International Paper is in Poland, near coordinates 54.35697, 18.48561.
Global Cellulose Fibers - Gdansk Modified Fiber Plant - International Paper is operated by International Paper Co.