FERROPEM

FERROPEM is a non-ferrous metals plant in France with a reported capacity of 1 unitless. It smelts or refines non-ferrous metals. By capacity it ranks #14 of 19 non-ferrous metals plants tracked in France. It emits about 192,000 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 44,755 cars. Its CO₂ per unit of capacity is about 318% above the median non-ferrous metals plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673305.

在上下文中：该设施如何比较

在1 unitless时，FERROPEM是France中non-ferrous metals plant的中位数约 1 unitless。 其单位容量的CO₂约为non-ferrous metals plant中位数的低于 11%。 子部门：other-metals。 作为non-ferrous metals plant，它需要强烈的工艺热量（通常400–1200°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 有色金属厂在其熔点以上的炉和坩埚中熔化、精炼和铸造金属；来自未隔热转移和储存容器的损失是显著的。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 192,000 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest non-ferrous metals plants in France

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

FERROPEM sits in a subarctic (boreal) climate zone (Köppen Dfc), at 45.5°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #14 largest of 19 non-ferrous metals plants in France by reported capacity.

Nearby industrial sites

• Savoie Department · Aluminium Smelter · 2,463 t CO₂
• TRIMET · Metals Plant · 265,000 t CO₂
• St. Jean de Maurienne aluminium plant · Aluminium Smelter · 324,411 t CO₂
• TRIMET FRANCE SAS · Metals Plant · 261,000 t CO₂
• FERROPEM GROUPE FERROATLANTICA · Metals Plant · 190,000 t CO₂
• FERROPEM · Metals Plant · 211,000 t CO₂

Location

Coordinates 45.51, 6.51. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions