Exshaw Plant

Exshaw Plant is a lime plant in Canada with a reported capacity of 300,230 t of lime. It calcines limestone into quicklime in high-temperature kilns. By capacity it ranks #5 of 11 lime plants tracked in Canada. It emits about 168,836 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 39,356 cars. Its CO₂ per unit of capacity is about 15% below the median lime plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38467326.

在上下文中：该设施如何比较

在300,230 t of lime时，Exshaw Plant是Canada中lime plant的中位数远高于 231,971 t of lime。 子部门：lime。 作为lime plant，它需要强烈的工艺热量（通常600–900°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 石灰厂在800-900°C的热窑中煅烧石灰石，热生石灰必须在隔热容器中处理，以防止与水分反应。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 168,836 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest lime plants in Canada

Reported capacity (t of lime), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Exshaw Plant sits in a subarctic (boreal) climate zone (Köppen Dfc), at 51.1°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #5 largest of 11 lime plants in Canada by reported capacity.

Nearby industrial sites

• Exshaw Cement Plant · Cement Plant · 901,178 t CO₂
• Baymag Exshaw Operations · Other Manufacturing · 173,462 t CO₂
• Calgary Wallboard Plant · Other Manufacturing · 27,508 t CO₂
• Carseland Nitrogen Operation · Chemical Plant · 708,709 t CO₂
• Skookumchuck Softwood Bleach Kraft Pulp Mill · Pulp & Paper Mill · 74,937 t CO₂
• Skookumchuk Pulp Mill · Pulp & Paper Mill · 65,570 t CO₂

Location

Coordinates 51.0682, -115.1364. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions