Refinery in United States. Approximate location 32.386, -90.90784.
RefineryUnited StatesCO₂ reported
Ergon Vicksburg Refinery is a refinery in United States with a reported capacity of 26,500 BBL per day. It processes crude oil into fuels and petrochemical feedstocks through distillation, cracking and reforming. It is operated by Ergon Inc. By capacity it ranks #104 of 134 oil refineries tracked in United States. It emits about 161,918 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 37,743 cars. Its CO₂ per unit of capacity is about 28% below the median refinery.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1753367.
在26,500 BBL per day时，Ergon Vicksburg Refinery是United States中refinery的中位数低于 93,500 BBL per day。 其单位容量的CO₂约为refinery中位数的低于 37%。 子部门：oil-and-gas-refining。 作为refinery，它需要强烈的工艺热量（通常200–600°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 炼油厂通过能源密集型蒸馏和裂化加热、分馏和化学转化原油为燃料和石化原料——对蒸汽发生和热回收要求极高。
容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (BBL per day), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Ergon Inc. All facilities by this operator →
Ergon Vicksburg Refinery sits in a humid subtropical climate zone (Köppen Cfa), at 32.4°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #104 largest of 134 oil refineries in United States by reported capacity.
Coordinates 32.386, -90.90784. View on OpenStreetMap.
A refinery like this runs hot equipment that sheds heat continuously: crude & vacuum distillation columns, fired heaters, heat exchangers, steam lines, valves & flanges (surface/process temperatures around 150–550 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 32,000 MWh/yr (≈ 6,400 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.
Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
Ergon Vicksburg Refinery is a refinery in United States. It processes crude oil into fuels and petrochemical feedstocks through distillation, cracking and reforming.
Ergon Vicksburg Refinery has a reported capacity of 26,500 BBL per day.
Ergon Vicksburg Refinery emits about 161,918 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 37,743 cars. That ranks #551 among tracked facilities in United States.
Ergon Vicksburg Refinery is in United States, near coordinates 32.386, -90.90784.
Ergon Vicksburg Refinery is operated by Ergon Inc.
