Other Manufacturing in United States. Approximate location 35.7378, -80.345.
Other ManufacturingUnited StatesCO₂ reported
EGGER Wood Products, LLC is an other manufacturing in United States with a reported capacity of 1 unitless. It runs heavy manufacturing processes (rubber, plastics and allied products). By capacity it ranks #176 of 338 manufacturing plants tracked in United States. It emits about 33,983 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 7,921 cars. Its CO₂ per unit of capacity is about 8% above the median other manufacturing.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3193024.
在1 unitless时，EGGER Wood Products, LLC是United States中other manufacturing的中位数约 1 unitless。 子部门：other-manufacturing。 作为other manufacturing，它需要强烈的工艺热量（通常100–600°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 重制造设施运行各种热密集型工艺（橡胶、塑料、压力容器）；有效维持工艺热对成本控制至关重要。
容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
EGGER Wood Products, LLC sits in a humid subtropical climate zone (Köppen Cfa), at 35.7°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #176 largest of 338 manufacturing plants in United States by reported capacity.
Coordinates 35.7378, -80.345. View on OpenStreetMap.
A other manufacturing like this runs hot equipment that sheds heat continuously: process heaters, ovens, steam lines, hot-water systems, valves & flanges (surface/process temperatures around 80–300 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,300 MWh/yr (≈ 260 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.
Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
EGGER Wood Products, LLC is a other manufacturing in United States. It runs heavy manufacturing processes (rubber, plastics and allied products).
EGGER Wood Products, LLC has a reported capacity of 1 unitless.
EGGER Wood Products, LLC emits about 33,983 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 7,921 cars. That ranks #1326 among tracked facilities in United States.
EGGER Wood Products, LLC is in United States, near coordinates 35.7378, -80.345.
