Home / United States / Manufacturing plants / DSM Protective Materials

DSM Protective Materials

Other Manufacturing in United States. Approximate location 35.65739, -77.35402.

Other ManufacturingUnited StatesCO₂ reported

DSM Protective Materials is an other manufacturing in United States with a reported capacity of 1 unitless. It runs heavy manufacturing processes (rubber, plastics and allied products). By capacity it ranks #303 of 338 manufacturing plants tracked in United States. It emits about 10,119 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 2,359 cars. Its CO₂ per unit of capacity is about 68% below the median other manufacturing.

1unitless
10,119t CO₂e / yr (Climate TRACE)
#1947CO₂ rank in United States
10119.00t CO₂ per capacity unit

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3192979.

在上下文中:该设施如何比较

在1 unitless时,DSM Protective Materials是United States中other manufacturing的中位数约 1 unitless。 其单位容量的CO₂约为other manufacturing中位数的低于 71%。 子部门:other-manufacturing。 作为other manufacturing,它需要强烈的工艺热量(通常100–600°C)来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量,通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%,将表面冷却至≤45°C,投资回收期通常不到2年。 重制造设施运行各种热密集型工艺(橡胶、塑料、压力容器);有效维持工艺热对成本控制至关重要。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出;部门角色基于工程参考。

What 10,119 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

2,359cars driven for a year
1,320homes' annual energy use
168,650tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest manufacturing plants in United States

SABIC INNOVATIVE PLASTICS MT. VERNON, LLC: 1 unitless1SABIC INNO…Celanese Acetate LLC - Manufacturing Processes: 1 unitless1Celanese A…GOODYEAR BEAUMONT CHEMICAL PLANT: 1 unitless1GOODYEAR B…OQ CORP BAY CITY PLANT: 1 unitless1OQ CORP BA…TICONA POLYMERS INCORPORATED: 1 unitless1TICONA POL…INEOS NOVA LLC BAYPORT SITE: 1 unitless1INEOS NOVA…KRATON POLYMERS U S LLC: 1 unitless1KRATON POL…AMERICAN SYNTHETIC RUBBER: 1 unitless1AMERICAN S…

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

DSM Protective Materials sits in a humid subtropical climate zone (Köppen Cfa), at 35.7°N in the northern hemisphere.

~18°Ctypical annual mean
~27°Ctypical warm-season
Humid subtropical: four distinct seasons — cold winters and warm summers

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #303 largest of 338 manufacturing plants in United States by reported capacity.

Nearby industrial sites

Location

Coordinates 35.65739, -77.35402. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

  • Up to 96% less heat loss from insulated surfaces
  • Surface temperature down to ≤45°C for worker safety
  • 6× faster maintenance access — removable and refittable
  • Typical payback up to 2 years

See Inzonex process-equipment insulation →

Inzonex modular insulation on industrial equipment

Frequently asked questions

What type of facility is DSM Protective Materials?

DSM Protective Materials is a other manufacturing in United States. It runs heavy manufacturing processes (rubber, plastics and allied products).

What is the capacity of DSM Protective Materials?

DSM Protective Materials has a reported capacity of 1 unitless.

How much CO₂ does DSM Protective Materials emit?

DSM Protective Materials emits about 10,119 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 2,359 cars. That ranks #1947 among tracked facilities in United States.

Where is DSM Protective Materials located?

DSM Protective Materials is in United States, near coordinates 35.65739, -77.35402.

Built from open public data; no personal information. Operate this site? Request a correction or removal.