Steel Plant in Ukraine. Approximate location 48.48079, 34.9781.
Steel PlantUkraineCO₂ reported
DCH Dnipro Metallurgical Plant is a steel plant in Ukraine with a reported capacity of 1,230,000 t of steel. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace). It is operated by Dnipro Metallurgical Plant PJSC. By capacity it ranks #8 of 10 steel plants tracked in Ukraine. It emits about 508,385 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 118,505 cars. Its CO₂ per unit of capacity is about 23% below the median steel plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1567291.
在1,230,000 t of steel时,DCH Dnipro Metallurgical Plant是Ukraine中steel plant的中位数低于 3,300,000 t of steel。 其单位容量的CO₂约为steel plant中位数的低于 33%。 子部门:iron-and-steel。 作为steel plant,它需要强烈的工艺热量(通常800–1500°C)来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量,通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%,将表面冷却至≤45°C,投资回收期通常不到2年。 钢铁厂在高炉中燃烧煤炭或使用电弧熔化废料;在两种情况下,熔融金属都必须保持在1,500°C以上并通过广泛的热管和容器转移。
容量和CO₂强度比较从Climate TRACE工业设施数据计算得出;部门角色基于工程参考。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of steel), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Dnipro Metallurgical Plant PJSC. All facilities by this operator →
DCH Dnipro Metallurgical Plant sits in a warm-summer humid continental climate zone (Köppen Dfb), at 48.5°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #8 largest of 10 steel plants in Ukraine by reported capacity.
Coordinates 48.48079, 34.9781. View on OpenStreetMap.
Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

DCH Dnipro Metallurgical Plant is a steel plant in Ukraine. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace).
DCH Dnipro Metallurgical Plant has a reported capacity of 1,230,000 t of steel.
DCH Dnipro Metallurgical Plant emits about 508,385 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 118,505 cars. That ranks #15 among tracked facilities in Ukraine.
DCH Dnipro Metallurgical Plant is in Ukraine, near coordinates 48.48079, 34.9781.
DCH Dnipro Metallurgical Plant is operated by Dnipro Metallurgical Plant PJSC.