CORNING DIESEL MANUFACTURING FACILITY

CORNING DIESEL MANUFACTURING FACILITY is a non-ferrous metals plant in United States with a reported capacity of 1 unitless. It smelts or refines non-ferrous metals. By capacity it ranks #43 of 330 non-ferrous metals plants tracked in United States. It emits about 108,959 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 25,398 cars. Its CO₂ per unit of capacity is about 137% above the median non-ferrous metals plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673235.

在上下文中：该设施如何比较

在1 unitless时，CORNING DIESEL MANUFACTURING FACILITY是United States中non-ferrous metals plant的中位数约 1 unitless。 其单位容量的CO₂约为non-ferrous metals plant中位数的高于 192%。 子部门：other-metals。 作为non-ferrous metals plant，它需要强烈的工艺热量（通常400–1200°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 有色金属厂在其熔点以上的炉和坩埚中熔化、精炼和铸造金属；来自未隔热转移和储存容器的损失是显著的。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 108,959 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest non-ferrous metals plants in United States

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

CORNING DIESEL MANUFACTURING FACILITY sits in a warm-summer humid continental climate zone (Köppen Dfb), at 42.1°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #43 largest of 330 non-ferrous metals plants in United States by reported capacity.

Nearby industrial sites

• ERWIN MANUFACTURING COMPLEX · Metals Plant · 10,096 t CO₂
• Painter Meat Processing · Food & Beverage · 4,154 t CO₂
• Kfs Lfg, Llc · Food & Beverage · 4,154 t CO₂
• Jdm Specialty Foods · Food & Beverage · 4,154 t CO₂
• Horseheads Brewing Inc · Food & Beverage · 4,154 t CO₂
• Sylvester Quality Meats · Food & Beverage · 4,154 t CO₂

Location

Coordinates 42.11055, -77.1558. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions