Textiles in China. Approximate location 31.95261, 119.81485.
TextilesChinaCO₂ reported
Changzhou Deyi Printing & Dyeing Co., Ltd is a textile mill in China with a reported capacity of 319,572,427 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #405 of 1,848 textile mills tracked in China. It emits about 6,976 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,626 cars.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38473014.
在319,572,427 USD时，Changzhou Deyi Printing & Dyeing Co., Ltd是China中textile mill的中位数约 319,572,427 USD。 子部门：textiles-leather-apparel。 作为textile mill，它需要强烈的工艺热量（通常60–150°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 纺织厂使用工艺蒸汽进行染色、整理和干燥，通常需要在长时间运行期间进行严格的温度控制——持续的热损失会侵蚀利润。
容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Changzhou Deyi Printing & Dyeing Co., Ltd sits in a humid subtropical climate zone (Köppen Cfa), at 32.0°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #405 largest of 1848 textile mills in China by reported capacity.
Coordinates 31.95261, 119.81485. View on OpenStreetMap.
A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 2,900 MWh/yr (≈ 590 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Changzhou Deyi Printing & Dyeing Co., Ltd is a textile mill in China. It spins, dyes and finishes textiles, leather or apparel using process steam.
Changzhou Deyi Printing & Dyeing Co., Ltd has a reported capacity of 319,572,427 USD.
Changzhou Deyi Printing & Dyeing Co., Ltd emits about 6,976 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,626 cars. That ranks #3378 among tracked facilities in China.
Changzhou Deyi Printing & Dyeing Co., Ltd is in China, near coordinates 31.95261, 119.81485.
