Brampton Brick

Brampton Brick is an other manufacturing in Canada with a reported capacity of 1 unitless. It runs heavy manufacturing processes (rubber, plastics and allied products). By capacity it ranks #5 of 21 manufacturing plants tracked in Canada. It emits about 60,955 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 14,209 cars. Its CO₂ per unit of capacity is about 93% above the median other manufacturing.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3192724.

在上下文中：该设施如何比较

在1 unitless时，Brampton Brick是Canada中other manufacturing的中位数约 1 unitless。 其单位容量的CO₂约为other manufacturing中位数的高于 86%。 子部门：other-manufacturing。 作为other manufacturing，它需要强烈的工艺热量（通常100–600°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 重制造设施运行各种热密集型工艺（橡胶、塑料、压力容器）；有效维持工艺热对成本控制至关重要。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 60,955 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest manufacturing plants in Canada

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Brampton Brick sits in a warm-summer humid continental climate zone (Köppen Dfb), at 43.7°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #5 largest of 21 manufacturing plants in Canada by reported capacity.

Nearby industrial sites

• Brampton Brick Limited · Other Manufacturing · 70,941 t CO₂
• ROXUL Inc. · Other Manufacturing · 87,162 t CO₂
• Etobicoke Casting Plant · Metals Plant · 9,171 t CO₂
• Silver Crystal Sports Inc. · Textiles · 12,324 t CO₂
• Mississauga Cement Plant · Cement Plant · 527,094 t CO₂
• Petro-Canada Mississauga Lubricants Refinery · Refinery · 105,301 t CO₂

Location

Coordinates 43.7211, -79.8164. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions