Home / South America / Brazil / Steel plants / ArcelorMittal Monlevade steel plant

ArcelorMittal Monlevade steel plant

Steel Plant in Brazil. Approximate location -19.83244, -43.13113.

Steel PlantBrazilCO₂ reported

ArcelorMittal Monlevade steel plant is a steel plant in Brazil with a reported capacity of 1,200,000 t of steel. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace). It is operated by ArcelorMittal Brasil SA. By capacity it ranks #7 of 22 steel plants tracked in Brazil. It emits about 1,835,723 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 427,907 cars. Its CO₂ per unit of capacity is about 183% above the median steel plant.

1,200,000t of steel
1,835,723t CO₂e / yr (Climate TRACE)
#20CO₂ rank in Brazil
1.53t CO₂ per capacity unit

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1566448.

在上下文中:该设施如何比较

在1,200,000 t of steel时,ArcelorMittal Monlevade steel plant是Brazil中steel plant的中位数约 1,000,000 t of steel。 其单位容量的CO₂约为steel plant中位数的高于 172%。 子部门:iron-and-steel。 作为steel plant,它需要强烈的工艺热量(通常800–1500°C)来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量,通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%,将表面冷却至≤45°C,投资回收期通常不到2年。 钢铁厂在高炉中燃烧煤炭或使用电弧熔化废料;在两种情况下,熔融金属都必须保持在1,500°C以上并通过广泛的热管和容器转移。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出;部门角色基于工程参考。

What 1,835,723 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

427,907cars driven for a year
239,400homes' annual energy use
30,595,383tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest steel plants in Brazil

ArcelorMittal Tubarão steel plant: 7,500,000 t of steel7.5MArcelorMit…CSN Volta Redonda steel plant: 6,251,000 t of steel6.3MCSN Volta …Ternium Brasil Santa Cruz steel plant: 5,200,000 t of steel5.2MTernium Br…Usiminas Ipatinga steel plant: 5,000,000 t of steel5.0MUsiminas I…Gerdau Açominas Ouro Branco steel plant: 4,360,000 t of steel4.4MGerdau Aço…ArcelorMittal Pecém steel plant: 3,000,000 t of steel3.0MArcelorMit…ArcelorMittal Monlevade steel plant: 1,200,000 t of steel1.2MArcelorMit…ArcelorMittal Piracicaba steel plant: 1,100,000 t of steel1.1MArcelorMit…

Reported capacity (t of steel), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Operator

Operated by ArcelorMittal Brasil SA. All facilities by this operator →

Local climate

ArcelorMittal Monlevade steel plant sits in a humid subtropical (dry winter) climate zone (Köppen Cwa), at 19.8°S in the southern hemisphere.

~19°Ctypical annual mean
~27°Ctypical warm-season
Humid subtropical (dry winter): warm all year, with distinct wet and dry seasons

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #7 largest of 22 steel plants in Brazil by reported capacity.

Nearby industrial sites

Location

Coordinates -19.83244, -43.13113. View on OpenStreetMap.

Heat loss & insulation profile

A steel plant like this runs hot equipment that sheds heat continuously: reheat & annealing furnaces, ladles, hot-blast stoves, steam & gas ducting (surface/process temperatures around 200–1,200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 4,800 MWh/yr (≈ 1,600 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

External climate finance your country can access

Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:

CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.

Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.

Frequently asked questions

What type of facility is ArcelorMittal Monlevade steel plant?

ArcelorMittal Monlevade steel plant is a steel plant in Brazil. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace).

What is the capacity of ArcelorMittal Monlevade steel plant?

ArcelorMittal Monlevade steel plant has a reported capacity of 1,200,000 t of steel.

How much CO₂ does ArcelorMittal Monlevade steel plant emit?

ArcelorMittal Monlevade steel plant emits about 1,835,723 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 427,907 cars. That ranks #20 among tracked facilities in Brazil.

Where is ArcelorMittal Monlevade steel plant located?

ArcelorMittal Monlevade steel plant is in Brazil, near coordinates -19.83244, -43.13113.

Who operates ArcelorMittal Monlevade steel plant?

ArcelorMittal Monlevade steel plant is operated by ArcelorMittal Brasil SA.

Built from open public data; no personal information. Operate this site? Request a correction or removal.