Other Manufacturing in United States. Approximate location 39.37049, -81.51531.
Other ManufacturingUnited StatesCO₂ reported
Solvay Specialty Polymers USA, L.L.C. is an other manufacturing in United States with a reported capacity of 1 unitless. It runs heavy manufacturing processes (rubber, plastics and allied products). By capacity it ranks #39 of 338 manufacturing plants tracked in United States. It emits about 81,472 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 18,991 cars. Its CO₂ per unit of capacity is about 158% above the median other manufacturing.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3194168.
При потужності 1 unitless Solvay Specialty Polymers USA, L.L.C. — це приблизно медіана other manufacturing у United States (1 unitless). Його викидання CO₂ на одиницю потужності приблизно на 134% вище медіани other manufacturing. Підсектор: other-manufacturing. Як other manufacturing, воно вимагає високотемпературного технологічного тепла (зазвичай 100–600°C) для основних промислових операцій — тепла, яке повинне подаватися котлами, печами або прямим спаленням, і втрати через неізольовані судини та трубопроводи представляють витрачене напразно паливо. Знімна модульна теплоізоляція може зменшити ці втрати на 80–96%, охолодивши поверхню обладнання до ≤45°C, з окупністю часто менше 2 років. Підприємства важкого машинобудування працюють з різноманітними теплоємними процесами (гума, пластмаси, посудини високого тиску); ефективне підтримання технологічного тепла критично для контролю витрат.
Порівняння продуктивності та інтенсивності CO₂ розраховано на основі даних промислових об'єктів Climate TRACE; роль сектору заснована на інженерних довідниках.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Solvay Specialty Polymers USA, L.L.C. sits in a humid subtropical climate zone (Köppen Cfa), at 39.4°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #39 largest of 338 manufacturing plants in United States by reported capacity.
Coordinates 39.37049, -81.51531. View on OpenStreetMap.
A other manufacturing like this runs hot equipment that sheds heat continuously: process heaters, ovens, steam lines, hot-water systems, valves & flanges (surface/process temperatures around 80–300 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 2,000 MWh/yr (≈ 400 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.
Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
Solvay Specialty Polymers USA, L.L.C. is a other manufacturing in United States. It runs heavy manufacturing processes (rubber, plastics and allied products).
Solvay Specialty Polymers USA, L.L.C. has a reported capacity of 1 unitless.
Solvay Specialty Polymers USA, L.L.C. emits about 81,472 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 18,991 cars. That ranks #755 among tracked facilities in United States.
Solvay Specialty Polymers USA, L.L.C. is in United States, near coordinates 39.37049, -81.51531.
