GEORGIA PACIFIC Gypsum LLC

GEORGIA PACIFIC Gypsum LLC is a non-ferrous metals plant in United States with a reported capacity of 1 unitless. It smelts or refines non-ferrous metals. By capacity it ranks #180 of 330 non-ferrous metals plants tracked in United States. It emits about 33,723 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 7,861 cars. Its CO₂ per unit of capacity is about 27% below the median non-ferrous metals plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673320.

У контексті: як порівнюється це підприємство

При потужності 1 unitless GEORGIA PACIFIC Gypsum LLC — це приблизно медіана non-ferrous metals plant у United States (1 unitless). Його викидання CO₂ на одиницю потужності приблизно на 10% нижче медіани non-ferrous metals plant. Підсектор: other-metals. Як non-ferrous metals plant, воно вимагає високотемпературного технологічного тепла (зазвичай 400–1200°C) для основних промислових операцій — тепла, яке повинне подаватися котлами, печами або прямим спаленням, і втрати через неізольовані судини та трубопроводи представляють витрачене напразно паливо. Знімна модульна теплоізоляція може зменшити ці втрати на 80–96%, охолодивши поверхню обладнання до ≤45°C, з окупністю часто менше 2 років. Заводи кольорової металургії плавлять, рафінують та відливають метали у печах і тиглях вище їхніх температур плавлення; втрати від неізольованих переводів та утримуючих судин значні.

Порівняння продуктивності та інтенсивності CO₂ розраховано на основі даних промислових об'єктів Climate TRACE; роль сектору заснована на інженерних довідниках.

What 33,723 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest non-ferrous metals plants in United States

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

GEORGIA PACIFIC Gypsum LLC sits in a cold desert climate zone (Köppen BWk), at 44.7°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #180 largest of 330 non-ferrous metals plants in United States by reported capacity.

Nearby industrial sites

• Western Sugar Cooperative Lovell · Lime Plant · 220,597 t CO₂
• The Western Sugar Cooperative · Lime Plant · 47,349 t CO₂
• Mustang Mountain Vineyard · Food & Beverage · 4,154 t CO₂
• Dakota Coal Co. Frannie Park · Lime Plant · 220,597 t CO₂
• Wyoming Lime Producers · Lime Plant · 166,628 t CO₂
• Wyoming Authentic Products Llc · Food & Beverage · 4,154 t CO₂

Location

Coordinates 44.7153, -108.186. View on OpenStreetMap.

Heat loss & insulation profile

A non-ferrous metals plant like this runs hot equipment that sheds heat continuously: furnaces, ladles, heat-treatment ovens, ducting & valves (surface/process temperatures around 150–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,500 MWh/yr (≈ 300 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

United States: funding & obligation

Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.

Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions