Shultz Steel Company

Shultz Steel Company is a non-ferrous metals plant in United States with a reported capacity of 1 unitless. It smelts or refines non-ferrous metals. By capacity it ranks #273 of 330 non-ferrous metals plants tracked in United States. It emits about 17,043 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 3,973 cars. Its CO₂ per unit of capacity is about 63% below the median non-ferrous metals plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673486.

Bağlamda: bu tesis nasıl karşılaştırılır

1 unitless'de, Shultz Steel Company United States'daki non-ferrous metals plant'lerin medyanı yaklaşık 1 unitless'dir. Kapasite başına CO₂'si non-ferrous metals plant'nin medyanı altında kabaca 54%'dir. Alt sektör: other-metals. non-ferrous metals plant olarak, temel endüstriyel işlemleri için yoğun proses ısısı (tipik olarak 400–1200°C) gerektirir — kazanlar, fırınlar veya doğrudan yanma ile sağlanması gereken ısı, ve izolasyon yapılmamış kaplar ve boruların kayıpları harcanan yakıtı temsil eder. Modüler çıkarılabilir yalıtım bu kayıpları %80–96 oranında azaltabilir, yüzeyleri ≤45°C'ye soğutabilir, geri ödeme süresi genellikle 2 yıldan azdır. Demir dışı metaller fabrikaları, erime noktalarının üzerindeki ocaklar ve potalar içinde metalleri eritir, rafine eder ve dönerler; izolasyon yapılmamış transferlerden ve tutma kaplarından kayıplar önemlidir.

Kapasite ve CO₂ yoğunluğu karşılaştırması Climate TRACE endüstriyel tesis verilerinden hesaplanmıştır; sektör rolü mühendislik referansına dayanmaktadır.

What 17,043 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest non-ferrous metals plants in United States

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Shultz Steel Company sits in a cold semi-arid steppe climate zone (Köppen BSk), at 34.0°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #273 largest of 330 non-ferrous metals plants in United States by reported capacity.

Nearby industrial sites

• World Oil Co South Gate Refinery · Refinery · 58,967 t CO₂
• Wei-Chuan Usa, Inc. · Food & Beverage · 4,154 t CO₂
• Perfecto Foods Inc. · Food & Beverage · 4,154 t CO₂
• Kitchen Cuts Llc. · Food & Beverage · 4,154 t CO₂
• Unibright Foods, Inc. · Food & Beverage · 4,154 t CO₂
• Bangkok Meatball Co. · Food & Beverage · 4,154 t CO₂

Location

Coordinates 33.95148, -118.17489. View on OpenStreetMap.

Heat loss & insulation profile

A non-ferrous metals plant like this runs hot equipment that sheds heat continuously: furnaces, ladles, heat-treatment ovens, ducting & valves (surface/process temperatures around 150–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,400 MWh/yr (≈ 280 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

United States: funding & obligation

Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.

Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions