Dallas Overhaul Center

Dallas Overhaul Center is an other manufacturing in United States with a reported capacity of 1 unitless. It runs heavy manufacturing processes (rubber, plastics and allied products). By capacity it ranks #208 of 338 manufacturing plants tracked in United States. It emits about 28,482 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 6,639 cars. Its CO₂ per unit of capacity is about 10% below the median other manufacturing.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3192991.

Bağlamda: bu tesis nasıl karşılaştırılır

1 unitless'de, Dallas Overhaul Center United States'daki other manufacturing'lerin medyanı yaklaşık 1 unitless'dir. Kapasite başına CO₂'si other manufacturing'nin medyanı altında kabaca 18%'dir. Alt sektör: other-manufacturing. other manufacturing olarak, temel endüstriyel işlemleri için yoğun proses ısısı (tipik olarak 100–600°C) gerektirir — kazanlar, fırınlar veya doğrudan yanma ile sağlanması gereken ısı, ve izolasyon yapılmamış kaplar ve boruların kayıpları harcanan yakıtı temsil eder. Modüler çıkarılabilir yalıtım bu kayıpları %80–96 oranında azaltabilir, yüzeyleri ≤45°C'ye soğutabilir, geri ödeme süresi genellikle 2 yıldan azdır. Ağır üretim tesisleri, çeşitli ısı yoğun işlemleri (kauçuk, plastikler, basınç kapları) gerçekleştirir; proses ısısını verimli bir şekilde sürdürmek maliyet kontrolü için kritiktir.

Kapasite ve CO₂ yoğunluğu karşılaştırması Climate TRACE endüstriyel tesis verilerinden hesaplanmıştır; sektör rolü mühendislik referansına dayanmaktadır.

What 28,482 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest manufacturing plants in United States

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Dallas Overhaul Center sits in a humid subtropical climate zone (Köppen Cfa), at 32.6°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #208 largest of 338 manufacturing plants in United States by reported capacity.

Nearby industrial sites

• In-N-Out Burgers · Food & Beverage · 4,154 t CO₂
• Allen Brothers - Texas · Food & Beverage · 4,154 t CO₂
• Tyson Prepared Foods, Inc. · Food & Beverage · 4,154 t CO₂
• Buckhead Meat Dallas A Sysco Company · Food & Beverage · 4,154 t CO₂
• Standard Meat Company · Food & Beverage · 4,154 t CO₂
• Surlean Meat Company · Food & Beverage · 4,154 t CO₂

Location

Coordinates 32.62659, -96.85298. View on OpenStreetMap.

Heat loss & insulation profile

A other manufacturing like this runs hot equipment that sheds heat continuously: process heaters, ovens, steam lines, hot-water systems, valves & flanges (surface/process temperatures around 80–300 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,200 MWh/yr (≈ 250 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

United States: funding & obligation

Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.

Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions