PDV America Lemont Refinery

PDV America Lemont Refinery is a refinery in United States with a reported capacity of 188,023 BBL per day. It processes crude oil into fuels and petrochemical feedstocks through distillation, cracking and reforming. By capacity it ranks #36 of 134 oil refineries tracked in United States. It emits about 2,000,702 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 466,364 cars. Its CO₂ per unit of capacity is about 26% above the median refinery.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1753302.

В контексте: как это предприятие сравнивается

На мощности 188,023 BBL per day PDV America Lemont Refinery — это значительно выше медианная refinery в United States (93,500 BBL per day). Его выброс CO₂ на единицу мощности примерно на 10% выше медианной refinery. Подсектор: oil-and-gas-refining. Как refinery, оно требует высокотемпературного технологического тепла (обычно 200–600°C) для основных промышленных операций — тепла, которое должно подаваться котлами, печами или прямым сжиганием, и потери через неизолированные сосуды и трубопроводы представляют потраченное впустую топливо. Съёмная модульная теплоизоляция может снизить эти потери на 80–96%, охладив поверхность оборудования до ≤45°C, с окупаемостью часто менее 2 лет. Нефтеперерабатывающие заводы нагревают, фракционируют и химически преобразуют сырую нефть в топливо и нефтехимическое сырьё путём энергоёмкой дистилляции и крекинга — чрезвычайно требовательны к генерации пара и рекуперации тепла.

Сравнение производительности и интенсивности CO₂ рассчитано на основе данных промышленных объектов Climate TRACE; роль сектора основана на инженерных справочниках.

What 2,000,702 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest oil refineries in United States

Reported capacity (BBL per day), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

PDV America Lemont Refinery sits in a hot-summer humid continental climate zone (Köppen Dfa), at 41.7°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #36 largest of 134 oil refineries in United States by reported capacity.

Nearby industrial sites

• Lemont Refinery · Chemical Plant · 37,746 t CO₂
• Matheson - LEMONT PLANT · Chemical Plant · 399,135 t CO₂
• Pactiv LLC · Other Manufacturing · 5,251 t CO₂
• The Real Good Foods Company, Llc · Food & Beverage · 4,154 t CO₂
• Smithfield Packaged Meats Corp. · Food & Beverage · 4,154 t CO₂
• Hearthside Food Solutions, Llc · Food & Beverage · 4,154 t CO₂

Location

Coordinates 41.65563, -88.04655. View on OpenStreetMap.

Heat loss & insulation profile

A refinery like this runs hot equipment that sheds heat continuously: crude & vacuum distillation columns, fired heaters, heat exchangers, steam lines, valves & flanges (surface/process temperatures around 150–550 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 57,000 MWh/yr (≈ 11,000 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

United States: funding & obligation

Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.

Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions