Hamilton Sundstrand Corporation

Hamilton Sundstrand Corporation is an other manufacturing in United States with a reported capacity of 1 unitless. It runs heavy manufacturing processes (rubber, plastics and allied products). By capacity it ranks #192 of 338 manufacturing plants tracked in United States. It emits about 30,756 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 7,169 cars.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3193352.

В контексте: как это предприятие сравнивается

На мощности 1 unitless Hamilton Sundstrand Corporation — это примерно медианная other manufacturing в United States (1 unitless). Его выброс CO₂ на единицу мощности примерно на 11% ниже медианной other manufacturing. Подсектор: other-manufacturing. Как other manufacturing, оно требует высокотемпературного технологического тепла (обычно 100–600°C) для основных промышленных операций — тепла, которое должно подаваться котлами, печами или прямым сжиганием, и потери через неизолированные сосуды и трубопроводы представляют потраченное впустую топливо. Съёмная модульная теплоизоляция может снизить эти потери на 80–96%, охладив поверхность оборудования до ≤45°C, с окупаемостью часто менее 2 лет. Предприятия тяжёлого машиностроения работают с различными теплоёмкими процессами (резина, пластмассы, сосуды высокого давления); эффективное поддержание технологического тепла критично для контроля затрат.

Сравнение производительности и интенсивности CO₂ рассчитано на основе данных промышленных объектов Climate TRACE; роль сектора основана на инженерных справочниках.

What 30,756 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest manufacturing plants in United States

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Hamilton Sundstrand Corporation sits in a hot-summer humid continental climate zone (Köppen Dfa), at 41.9°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #192 largest of 338 manufacturing plants in United States by reported capacity.

Nearby industrial sites

• Brook Broad Brewing Llc · Food & Beverage · 4,154 t CO₂
• Brignole Distillery, Llc · Food & Beverage · 4,154 t CO₂
• Waybest Foods, Inc. · Food & Beverage · 4,154 t CO₂
• Eight Four Three Blue Hills Ave., Llc · Food & Beverage · 4,154 t CO₂
• Nutty Cow Inc. · Food & Beverage · 4,154 t CO₂
• 39 Vineyard Place Llc · Food & Beverage · 4,154 t CO₂

Location

Coordinates 41.91935, -72.68439. View on OpenStreetMap.

Heat loss & insulation profile

A other manufacturing like this runs hot equipment that sheds heat continuously: process heaters, ovens, steam lines, hot-water systems, valves & flanges (surface/process temperatures around 80–300 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,300 MWh/yr (≈ 260 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

United States: funding & obligation

Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.

Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions