GLOBE METALLURGICAL INC

GLOBE METALLURGICAL INC is a non-ferrous metals plant in United States with a reported capacity of 1 unitless. It smelts or refines non-ferrous metals. By capacity it ranks #323 of 330 non-ferrous metals plants tracked in United States. It emits about 74 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 17 cars. Its CO₂ per unit of capacity is about 100% below the median non-ferrous metals plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673327.

В контексте: как это предприятие сравнивается

На мощности 1 unitless GLOBE METALLURGICAL INC — это примерно медианная non-ferrous metals plant в United States (1 unitless). Его выброс CO₂ на единицу мощности примерно на 100% ниже медианной non-ferrous metals plant. Подсектор: other-metals. Как non-ferrous metals plant, оно требует высокотемпературного технологического тепла (обычно 400–1200°C) для основных промышленных операций — тепла, которое должно подаваться котлами, печами или прямым сжиганием, и потери через неизолированные сосуды и трубопроводы представляют потраченное впустую топливо. Съёмная модульная теплоизоляция может снизить эти потери на 80–96%, охладив поверхность оборудования до ≤45°C, с окупаемостью часто менее 2 лет. Заводы цветной металлургии плавят, рафинируют и отливают металлы в печах и тиглях выше их температур плавления; потери от неизолированных переводов и удерживающих сосудов значительны.

Сравнение производительности и интенсивности CO₂ рассчитано на основе данных промышленных объектов Climate TRACE; роль сектора основана на инженерных справочниках.

What 74 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest non-ferrous metals plants in United States

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

GLOBE METALLURGICAL INC sits in a warm-summer humid continental climate zone (Köppen Dfb), at 43.1°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #323 largest of 330 non-ferrous metals plants in United States by reported capacity.

Nearby industrial sites

• GLOBE METALLURGICAL INC · Metals Plant · 180,512 t CO₂
• Olin Chlor Alkali Products · Chemical Plant · 16,629 t CO₂
• Linde Inc · Chemical Plant · 32,168 t CO₂
• Finger Food Products, Llc · Food & Beverage · 4,154 t CO₂
• Bella Rose Vineyard & Winery, Llc · Food & Beverage · 4,154 t CO₂
• SUMITOMO RUBBER USA, LLC · Other Manufacturing · 31,252 t CO₂

Location

Coordinates 43.12195, -79.04452. View on OpenStreetMap.

Heat loss & insulation profile

A non-ferrous metals plant like this runs hot equipment that sheds heat continuously: furnaces, ladles, heat-treatment ovens, ducting & valves (surface/process temperatures around 150–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,300 MWh/yr (≈ 260 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

United States: funding & obligation

Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.

Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions