Allegheny & Tsingshan Stainless, LLC

Allegheny & Tsingshan Stainless, LLC is a non-ferrous metals plant in United States with a reported capacity of 1 unitless. It smelts or refines non-ferrous metals. By capacity it ranks #282 of 330 non-ferrous metals plants tracked in United States. It emits about 14,163 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 3,301 cars. Its CO₂ per unit of capacity is about 69% below the median non-ferrous metals plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673192.

Em contexto: como esta instalação se compara

Com 1 unitless, Allegheny & Tsingshan Stainless, LLC é em torno de a mediana de non-ferrous metals plant em United States (1 unitless). Seu CO₂ por unidade de capacidade é aproximadamente 62% abaixo de a mediana de non-ferrous metals plant. Subsetor: other-metals. Como non-ferrous metals plant, requer calor de processo intenso (tipicamente 400–1200°C) para suas operações industriais centrais — calor que deve ser fornecido por caldeiras, fornos ou combustão direta, e as perdas através de vasos e tubulações não isolados representam combustível desperdiçado. O isolamento modular removível pode reduzir essas perdas em 80–96%, esfriando superfícies a ≤45°C, com payback geralmente inferior a 2 anos. As plantas de metais não ferrosos fundem, refinam e funderm metais em fornos e cadinhos acima de seus pontos de fusão; as perdas de transferências não isoladas e vasos de retenção são significativas.

Comparação de capacidade e intensidade de CO₂ calculada a partir dos dados de instalações industriais Climate TRACE; função do setor baseada em referência de engenharia.

What 14,163 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest non-ferrous metals plants in United States

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Allegheny & Tsingshan Stainless, LLC sits in a warm-summer humid continental climate zone (Köppen Dfb), at 40.6°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #282 largest of 330 non-ferrous metals plants in United States by reported capacity.

Nearby industrial sites

• Gold Bond - SHI Plant · Metals Plant · 78,085 t CO₂
• BVPV Styrenics LLC · Other Manufacturing · 34,004 t CO₂
• Shell Chemicals Ltd. , Monaca, Pa · Petrochemical · 2,031,205 t CO₂
• Ergon Newell Refinery · Refinery · 134,816 t CO₂
• Blackhawk Specialty Foods · Food & Beverage · 4,154 t CO₂
• ERGON WEST VIRGINIA INC · Chemical Plant · 18,700 t CO₂

Location

Coordinates 40.63537, -80.44903. View on OpenStreetMap.

Heat loss & insulation profile

A non-ferrous metals plant like this runs hot equipment that sheds heat continuously: furnaces, ladles, heat-treatment ovens, ducting & valves (surface/process temperatures around 150–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,400 MWh/yr (≈ 270 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

United States: funding & obligation

Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.

Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions