Sanggau Regency — Indonesia
Aluminium Smelter in Indonesia. Approximate location 0.26741, 110.43224.
Aluminium SmelterIndonesiaCO₂ estimate (modelled)
Sanggau Regency is an aluminium smelter in Indonesia. Its listed capacity is 21,421 t of alumina/aluminum. Aluminium smelters use large electric currents to refine alumina into molten aluminium above 900°C, and the hot metal must flow through crucibles and casting equipment. By capacity it ranks #3 among 3 aluminium smelters in Indonesia. It emits about 44,764 t CO₂e a year from Climate TRACE. That is 0.06% of the CO₂e from the 53 facilities in Indonesia that have an emissions figure in IndustryAtlas.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673072.
Data status
Known source data
Calculated from the dataset
Not available
Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.
Similar facilities by modelled emissions
- Sambalpur District · 43,106 t CO₂e/yr · India
- Bouches-du-Rhône Department · 47,088 t CO₂e/yr · France
- Kidricevo aluminium plant · 38,144 t CO₂e/yr · Slovenia
- Tulcea Commune · 36,222 t CO₂e/yr · Romania
- Beyrede Alumina Refinery · 32,554 t CO₂e/yr · France
Same Climate TRACE subsector; closest non-placeholder modelled CO₂e values. Russia and Belarus excluded.
In context: how this facility compares
At 21,421 t of alumina/aluminum, Sanggau Regency is below the median aluminium smelter in Indonesia (158,673 t of alumina/aluminum). Subsector: aluminum. As aluminium smelter, it requires high process heat (typically 600–900°C) for its core industrial operations, supplied by boilers, furnaces or direct combustion. Aluminium smelters use large electric currents to refine alumina into molten aluminium above 900°C, and the hot metal must flow through crucibles and casting equipment.
Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.
What 44,764 t CO₂e a year looks like
This facility's estimated annual CO₂e (Climate TRACE, modelled) in everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Carbon cost and Scope 1 emissions
At its reported 45k t CO₂e/yr (Scope 1), Sanggau Regency carries no domestic carbon price — and as a CBAM-covered product, its 45k t at the EU CBAM rate (€75/t) is €3.4M/yr of exposure on EU-bound exports. CBAM share rises from 2.5% (2026) to 100% by 2034. No domestic carbon price — but cement, steel, aluminium, fertilizer and hydrogen exported to the EU face CBAM at €75/t (rising to 100% by 2034).
Carbon price: EU CBAM €75/t · EU ETS €85/t, September 10, 2026, refreshed live via Carbon Hub. CO₂: Climate TRACE. Indicative carbon value, not the cash bill — free allocation applies; not compliance advice.
Capacity vs largest aluminium smelters in Indonesia
Listed capacity (t of alumina/aluminum), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Local climate
Sanggau Regency sits in a tropical rainforest climate zone (Köppen Af), at 0.3°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
Site climate & environmental severity
This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
In this site’s local climate, a bare 150 °C surface sheds about 1235 W/m² to ambient — roughly 0.95× the loss at a 20 °C reference. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
How it compares & nearby sites
The #3 largest of 3 aluminium smelters in Indonesia by listed capacity (Climate TRACE).
Nearby industrial sites
- Tajan Bauxite Mine & CGA Alumina Refinery · Aluminium Smelter · 626,920 t CO₂
- CMS Cement Siburan Cement Plant · Cement Plant · 372,320 t CO₂
- P.T. Westkalindo Pulp & Paper Mill · Pulp & Paper Mill
- Kayong Utara Regency · Aluminium Smelter · 331,585 t CO₂
Location
Coordinates 0.26741, 110.43224. View on OpenStreetMap.
Frequently asked questions
What type of facility is Sanggau Regency?
Sanggau Regency is a aluminium smelter in Indonesia. Aluminium smelters use large electric currents to refine alumina into molten aluminium above 900°C, and the hot metal must flow through crucibles and casting equipment.
What capacity is listed for Sanggau Regency?
The open dataset lists 21,421 t of alumina/aluminum of capacity for Sanggau Regency.
How much CO₂ does Sanggau Regency emit?
The page uses about 44,764 t CO₂e/year from the open dataset It ranks #53 among facilities in Indonesia by estimated CO₂.
Where is Sanggau Regency located?
Sanggau Regency is in Indonesia at approximately 0.26741, 110.43224.