Home / South America / Uruguay / Pulp & paper mills / CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill

CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill

Pulp & Paper Mill in Uruguay. Approximate location -34.88557, -55.26736.

Pulp & Paper MillUruguayCO₂ reported

CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill is a pulp & paper mill in Uruguay with a reported capacity of 750,000 t of pulp & paper. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency. It is operated by Stora Enso Oyj. It emits about 405,318 t CO₂e a year from Climate TRACE, roughly comparable to the annual emissions of 94k passenger cars.

750,000t of pulp & paper
405,318t CO₂e / yr (Climate TRACE)
#1CO₂ rank in Uruguay
0.54t CO₂ per capacity unit

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-44375669.

Data status

Known source data

FacilityCEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill Climate TRACE
CountryUruguay Climate TRACE
Coordinates-34.88557, -55.26736 Climate TRACE
Sector / subsectorpulp-and-paper Climate TRACE
Reported capacity750,000 t of pulp & paper Climate TRACE
Owner / operatorStora Enso Oyj Climate TRACE
Modelled CO₂e405,318 t/yr Climate TRACE

Calculated from the dataset

Uruguay rank#1 of 5 · top 20.0% calculated
Global pulp-and-paper rank#19 of 173 · top 11.0% calculated
Climate contextderived from coordinates calculated

Not available

Fuel typeNot available not in dataset
Thermal capacity (MW)Not available not in dataset

Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.

Similar facilities by modelled emissions

Same Climate TRACE subsector; closest non-placeholder modelled CO₂e values. Russia and Belarus excluded.

Operating power plants within 50 km

PowerAtlas operating assets, ordered by great-circle distance from published coordinates.

In context: how this facility compares

At 750,000 t of pulp & paper, CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill is around the median pulp & paper mill in Uruguay (750,000 t of pulp & paper). Subsector: pulp-and-paper. As pulp & paper mill, it requires high process heat (typically 150–250°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency.

Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.

What 405,318 t CO₂e a year looks like

This facility's reported annual CO₂e in everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

94kcars driven for a year
53khomes' annual energy use
6.8 milliontree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Carbon cost, Scope 1 & decarbonization potential

At its reported 405k t CO₂e/yr (Scope 1), CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill carries no domestic carbon price; pulp & paper mills are not a CBAM-covered good, so there is no border-carbon liability. At the EU ETS reference price (€75/t) the emissions carry an indicative carbon value of €30.5M/yr. The fastest decarbonization lever is energy efficiency: eliminating heat loss on hot equipment (removable insulation, steam & waste-heat recovery) typically cuts 2–5% of fuel-related CO₂ — here ≈8k t–20k t/yr, worth €611k€1.5M, with payback up to 2 years. No domestic carbon price — but cement, steel, aluminium, fertilizer and hydrogen exported to the EU face CBAM at €75/t (rising to 100% by 2034).

405k t CO₂e / yrScope 1 emissions
€30.5M/yrindicative carbon value (not a CBAM liability)
8k t–20k t/yr ≈ €611k€1.5MDecarbonization potential

Carbon price: EU CBAM €75/t · EU ETS €79/t, July 2, 2026, refreshed live via Carbon Hub. CO₂: Climate TRACE. Efficiency range: US DOE / ASTM C680 (method). Indicative carbon value, not the cash bill — free allocation applies; not compliance advice. Estimate the saving for this site →

Operator

Operated by Stora Enso Oyj. All facilities by this operator →

Local climate

CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill sits in a temperate oceanic climate zone (Köppen Cfb), at 34.9°S in the southern hemisphere.

~11°Ctypical annual mean
~18°Ctypical warm-season
Temperate oceanic: hot summers and mild winters

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

Site climate & environmental severity

The local climate sets how fast unprotected steel, protective coatings and the insulation on hot process equipment degrade at this site. It sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.

C4ISO 9223 corrosivity (indicative)
40/100environmental-severity index
10.9°Cseasonal temperature swing
15 kmdistance to coast
HighCUI risk tier

In this site’s local climate, a bare 150 °C surface sheds about 1336 W/m² to ambient — roughly 1.03× the loss at a 20 °C reference; removable insulation recovers about 1269 W/m² of that. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).

Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby sites

Nearby industrial sites

Location

Coordinates -34.88557, -55.26736. View on OpenStreetMap.

Heat loss & insulation profile

For a pulp & paper mill, the main modular-insulation targets are digesters, dryers, evaporators, steam lines, hot-water systems. Typical hot-surface ranges used for screening: 80–200 °C °C.

Indicative recoverable energy

A first-pass insulation screen suggests about 9,000 MWh/year of recoverable heat-loss reduction and about 1,800 t CO₂e/year of avoided emissions. Screening estimate scaled from installed process-heat projects and surface-temperature reduction data.

See Inzonex Modular Insulation → Run the calculator →

Screening calculation from facility class, capacity and open emissions/energy context. Engineering survey required before procurement.

Safety & the no-regret first step

Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.

External climate finance your country can access

For energy-efficiency projects around process heat, likely external funding channels include:

Sources: country climate-finance facilities and public development-bank programmes.

Frequently asked questions

What type of facility is CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill?

CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill is a pulp & paper mill in Uruguay. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency.

What capacity is reported for CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill?

The open dataset reports 750,000 t of pulp & paper of capacity for CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill.

How much CO₂ does CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill emit?

The page uses about 405,318 t CO₂e/year from the open dataset It ranks #1 among facilities in Uruguay by reported CO₂.

Where is CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill located?

CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill is in Uruguay at approximately -34.88557, -55.26736.

Who operates CEPP Celulosa y Energía Punta Pereira S.A. Montes del Plata - Joint venture Stora Enso y Celulosa Arauco y Constitución Pulp Mill?

The operator recorded in the open dataset is Stora Enso Oyj.

Built from open public data; no personal information. Operate this site? Request a correction or removal.