Cement Plant in China. Approximate location 38.51413, 105.97867.
Cement PlantChinaCO₂ reported
Ningxia Saima Cement Co Ltd Cement Plant is a cement plant in China with a reported capacity of 6,800,000 t of cement. It burns limestone in high-temperature rotary kilns to make clinker and cement. It is operated by Ningxia Saima Cement Co Ltd. By capacity it ranks #17 of 739 cement plants tracked in China. It emits about 3,086,132 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 719,378 cars. Its CO₂ per unit of capacity is about 26% above the median cement plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1895894.
Przy 6,800,000 t of cement, Ningxia Saima Cement Co Ltd Cement Plant jest znacznie powyżej medianę cement plant w China (2,000,000 t of cement). Jego CO₂ na jednostkę pojemności wynosi w przybliżeniu 26% powyżej medianę cement plant. Podsektor: cement. Jako cement plant, wymaga intensywnego ciepła procesowego (typowo 800–1400°C) do swoich głównych operacji przemysłowych — ciepła, które musi być dostarczane przez kotły, piece lub spalanie bezpośrednie, a straty przez nieisolowane zbiorniki i rury stanowią zmarnowane paliwo. Modułowa izolacja demontowalna może zmniejszyć te straty o 80–96%, chłodząc powierzchnie do ≤45°C, z zwrotem inwestycji często poniżej 2 lat. Cementownie ogrzewają wapień do 1.400°C w piecach obracających się — jeden z najgorętszych procesów przemysłowych — i muszą precyzyjnie kontrolować temperaturę na całej długości pieca.
Porównanie pojemności i intensywności CO₂ obliczane na podstawie danych instalacji przemysłowych Climate TRACE; rola sektora oparta na odniesieniau inżynierskim.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of cement), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Ningxia Saima Cement Co Ltd. All facilities by this operator →
Ningxia Saima Cement Co Ltd Cement Plant sits in a cold desert climate zone (Köppen BWk), at 38.5°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #17 largest of 739 cement plants in China by reported capacity.
Coordinates 38.51413, 105.97867. View on OpenStreetMap.
A cement plant like this runs hot equipment that sheds heat continuously: rotary kiln shell, preheater tower, tertiary air duct & kiln hood, clinker-cooler ducts, valves (surface/process temperatures around 200–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
60% of cement CO2 is process calcination - NOT insulation-addressable; energy here is the fuel side only.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 19,000 MWh/yr (≈ 6,500 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Ningxia Saima Cement Co Ltd Cement Plant is a cement plant in China. It burns limestone in high-temperature rotary kilns to make clinker and cement.
Ningxia Saima Cement Co Ltd Cement Plant has a reported capacity of 6,800,000 t of cement.
Ningxia Saima Cement Co Ltd Cement Plant emits about 3,086,132 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 719,378 cars. That ranks #233 among tracked facilities in China.
Ningxia Saima Cement Co Ltd Cement Plant is in China, near coordinates 38.51413, 105.97867.
Ningxia Saima Cement Co Ltd Cement Plant is operated by Ningxia Saima Cement Co Ltd.