Refinery in Ukraine. Approximate location 48.85015, 38.30783.
RefineryUkraine
Linos Lisichansk Refinery is a refinery in Ukraine with a reported capacity of 160,000 BBL per day. It processes crude oil into fuels and petrochemical feedstocks through distillation, cracking and reforming. It is operated by Rosneft PJSC. By capacity it ranks #2 of 6 oil refineries tracked in Ukraine.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3144148.
Przy 160,000 BBL per day, Linos Lisichansk Refinery jest około medianę refinery w Ukraine (137,000 BBL per day). Podsektor: oil-and-gas-refining. Jako refinery, wymaga intensywnego ciepła procesowego (typowo 200–600°C) do swoich głównych operacji przemysłowych — ciepła, które musi być dostarczane przez kotły, piece lub spalanie bezpośrednie, a straty przez nieisolowane zbiorniki i rury stanowią zmarnowane paliwo. Modułowa izolacja demontowalna może zmniejszyć te straty o 80–96%, chłodząc powierzchnie do ≤45°C, z zwrotem inwestycji często poniżej 2 lat. Rafinerie ogrzewają, frakcjonują i chemicznie transformują ropę naftową w paliwa i surowce petrochemiczne poprzez destylację i krekowanie o wysokim natężeniu energii — niezwykle wymagające w stosunku do generowania pary i odzysku ciepła.
Porównanie pojemności i intensywności CO₂ obliczane na podstawie danych instalacji przemysłowych Climate TRACE; rola sektora oparta na odniesieniau inżynierskim.
Reported capacity (BBL per day), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Rosneft PJSC. All facilities by this operator →
Linos Lisichansk Refinery sits in a warm-summer humid continental climate zone (Köppen Dfb), at 48.9°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #2 largest of 6 oil refineries in Ukraine by reported capacity.
Coordinates 48.85015, 38.30783. View on OpenStreetMap.
A refinery like this runs hot equipment that sheds heat continuously: crude & vacuum distillation columns, fired heaters, heat exchangers, steam lines, valves & flanges (surface/process temperatures around 150–550 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 54,000 MWh/yr (≈ 11,000 t CO₂/yr) — the sector-typical mid-range (no per-site CO₂ reported). Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Linos Lisichansk Refinery is a refinery in Ukraine. It processes crude oil into fuels and petrochemical feedstocks through distillation, cracking and reforming.
Linos Lisichansk Refinery has a reported capacity of 160,000 BBL per day.
Linos Lisichansk Refinery is in Ukraine, near coordinates 48.85015, 38.30783.
Linos Lisichansk Refinery is operated by Rosneft PJSC.
