Steel Plant in Bangladesh. Approximate location 22.50575, 91.71393.
Steel PlantBangladeshCO₂ reported
KSRM Sitakunda steel plant is a steel plant in Bangladesh with a reported capacity of 800,000 t of steel. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace). It is operated by KSRM Steel Plant Ltd. By capacity it ranks #5 of 5 steel plants tracked in Bangladesh. It emits about 42,971 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 10,017 cars. Its CO₂ per unit of capacity is about 90% below the median steel plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1566439.
Przy 800,000 t of steel, KSRM Sitakunda steel plant jest poniżej medianę steel plant w Bangladesh (1,400,000 t of steel). Jego CO₂ na jednostkę pojemności wynosi w przybliżeniu 83% poniżej medianę steel plant. Podsektor: iron-and-steel. Jako steel plant, wymaga intensywnego ciepła procesowego (typowo 800–1500°C) do swoich głównych operacji przemysłowych — ciepła, które musi być dostarczane przez kotły, piece lub spalanie bezpośrednie, a straty przez nieisolowane zbiorniki i rury stanowią zmarnowane paliwo. Modułowa izolacja demontowalna może zmniejszyć te straty o 80–96%, chłodząc powierzchnie do ≤45°C, z zwrotem inwestycji często poniżej 2 lat. Huty stali spalają węgiel w piecach wielkich lub używają łuków elektrycznych do topienia złomu; w obu przypadkach metal w stanie płynnym musi być utrzymywany powyżej 1.500°C i przenoszony przez rozległy system gorących rur i zbiorników.
Porównanie pojemności i intensywności CO₂ obliczane na podstawie danych instalacji przemysłowych Climate TRACE; rola sektora oparta na odniesieniau inżynierskim.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of steel), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by KSRM Steel Plant Ltd. All facilities by this operator →
KSRM Sitakunda steel plant sits in a tropical monsoon climate zone (Köppen Am), at 22.5°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #5 largest of 5 steel plants in Bangladesh by reported capacity.
Coordinates 22.50575, 91.71393. View on OpenStreetMap.
A steel plant like this runs hot equipment that sheds heat continuously: reheat & annealing furnaces, ladles, hot-blast stoves, steam & gas ducting (surface/process temperatures around 200–1,200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 3,600 MWh/yr (≈ 1,200 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
KSRM Sitakunda steel plant is a steel plant in Bangladesh. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace).
KSRM Sitakunda steel plant has a reported capacity of 800,000 t of steel.
KSRM Sitakunda steel plant emits about 42,971 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 10,017 cars. That ranks #11 among tracked facilities in Bangladesh.
KSRM Sitakunda steel plant is in Bangladesh, near coordinates 22.50575, 91.71393.
KSRM Sitakunda steel plant is operated by KSRM Steel Plant Ltd.
