Cement Plant in Pakistan. Approximate location 25.13884, 66.91376.
Cement PlantPakistanCO₂ reported
Attock Cement Hub Cement Plant is a cement plant in Pakistan with a reported capacity of 4,300,000 t of cement. It burns limestone in high-temperature rotary kilns to make clinker and cement. It is operated by Attock Cement Pakistan Ltd. By capacity it ranks #6 of 31 cement plants tracked in Pakistan. It emits about 2,249,783 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 524,425 cars. Its CO₂ per unit of capacity is about 45% above the median cement plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1897628.
Przy 4,300,000 t of cement, Attock Cement Hub Cement Plant jest znacznie powyżej medianę cement plant w Pakistan (2,300,000 t of cement). Jego CO₂ na jednostkę pojemności wynosi w przybliżeniu 14% powyżej medianę cement plant. Podsektor: cement. Jako cement plant, wymaga intensywnego ciepła procesowego (typowo 800–1400°C) do swoich głównych operacji przemysłowych — ciepła, które musi być dostarczane przez kotły, piece lub spalanie bezpośrednie, a straty przez nieisolowane zbiorniki i rury stanowią zmarnowane paliwo. Modułowa izolacja demontowalna może zmniejszyć te straty o 80–96%, chłodząc powierzchnie do ≤45°C, z zwrotem inwestycji często poniżej 2 lat. Cementownie ogrzewają wapień do 1.400°C w piecach obracających się — jeden z najgorętszych procesów przemysłowych — i muszą precyzyjnie kontrolować temperaturę na całej długości pieca.
Porównanie pojemności i intensywności CO₂ obliczane na podstawie danych instalacji przemysłowych Climate TRACE; rola sektora oparta na odniesieniau inżynierskim.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of cement), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Attock Cement Pakistan Ltd. All facilities by this operator →
Attock Cement Hub Cement Plant sits in a hot desert climate zone (Köppen BWh), at 25.1°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #6 largest of 31 cement plants in Pakistan by reported capacity.
Coordinates 25.13884, 66.91376. View on OpenStreetMap.
A cement plant like this runs hot equipment that sheds heat continuously: rotary kiln shell, preheater tower, tertiary air duct & kiln hood, clinker-cooler ducts, valves (surface/process temperatures around 200–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
60% of cement CO2 is process calcination - NOT insulation-addressable; energy here is the fuel side only.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 19,000 MWh/yr (≈ 6,500 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Attock Cement Hub Cement Plant is a cement plant in Pakistan. It burns limestone in high-temperature rotary kilns to make clinker and cement.
Attock Cement Hub Cement Plant has a reported capacity of 4,300,000 t of cement.
Attock Cement Hub Cement Plant emits about 2,249,783 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 524,425 cars. That ranks #4 among tracked facilities in Pakistan.
Attock Cement Hub Cement Plant is in Pakistan, near coordinates 25.13884, 66.91376.
Attock Cement Hub Cement Plant is operated by Attock Cement Pakistan Ltd.
