Steel Plant in China. Approximate location 41.17338, 122.94335.
Steel PlantChinaCO₂ reported
Anshan Baode Iron and Steel Co Ltd is a steel plant in China with a reported capacity of 1,800,000 t of steel. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace). It is operated by Anshan Baode Iron & Steel Co Ltd. By capacity it ranks #197 of 363 steel plants tracked in China. It emits about 3,069,426 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 715,484 cars. Its CO₂ per unit of capacity is about 216% above the median steel plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1566621.
Przy 1,800,000 t of steel, Anshan Baode Iron and Steel Co Ltd jest poniżej medianę steel plant w China (2,300,000 t of steel). Jego CO₂ na jednostkę pojemności wynosi w przybliżeniu 33% powyżej medianę steel plant. Podsektor: iron-and-steel. Jako steel plant, wymaga intensywnego ciepła procesowego (typowo 800–1500°C) do swoich głównych operacji przemysłowych — ciepła, które musi być dostarczane przez kotły, piece lub spalanie bezpośrednie, a straty przez nieisolowane zbiorniki i rury stanowią zmarnowane paliwo. Modułowa izolacja demontowalna może zmniejszyć te straty o 80–96%, chłodząc powierzchnie do ≤45°C, z zwrotem inwestycji często poniżej 2 lat. Huty stali spalają węgiel w piecach wielkich lub używają łuków elektrycznych do topienia złomu; w obu przypadkach metal w stanie płynnym musi być utrzymywany powyżej 1.500°C i przenoszony przez rozległy system gorących rur i zbiorników.
Porównanie pojemności i intensywności CO₂ obliczane na podstawie danych instalacji przemysłowych Climate TRACE; rola sektora oparta na odniesieniau inżynierskim.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of steel), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Anshan Baode Iron & Steel Co Ltd. All facilities by this operator →
Anshan Baode Iron and Steel Co Ltd sits in a monsoon hot-summer continental climate zone (Köppen Dwa), at 41.2°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #197 largest of 363 steel plants in China by reported capacity.
Coordinates 41.17338, 122.94335. View on OpenStreetMap.
A steel plant like this runs hot equipment that sheds heat continuously: reheat & annealing furnaces, ladles, hot-blast stoves, steam & gas ducting (surface/process temperatures around 200–1,200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 5,600 MWh/yr (≈ 1,900 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Anshan Baode Iron and Steel Co Ltd is a steel plant in China. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace).
Anshan Baode Iron and Steel Co Ltd has a reported capacity of 1,800,000 t of steel.
Anshan Baode Iron and Steel Co Ltd emits about 3,069,426 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 715,484 cars. That ranks #234 among tracked facilities in China.
Anshan Baode Iron and Steel Co Ltd is in China, near coordinates 41.17338, 122.94335.
Anshan Baode Iron and Steel Co Ltd is operated by Anshan Baode Iron & Steel Co Ltd.
