Other Manufacturing in United States. Approximate location 43.22783, -77.41153.
Other ManufacturingUnited StatesCO₂ reported
Xerox Corporation is an other manufacturing in United States with a reported capacity of 1 unitless. It runs heavy manufacturing processes (rubber, plastics and allied products). By capacity it ranks #206 of 338 manufacturing plants tracked in United States. It emits about 28,626 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 6,673 cars. Its CO₂ per unit of capacity is about 9% below the median other manufacturing.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3194486.
1 unitlessで、Xerox CorporationはUnited Statesのother manufacturingの中央値約 1 unitlessです。 容量あたりのCO₂は、other manufacturingの中央値下約18%です。 サブセクター：other-manufacturing。 other manufacturingとして、その中核的な産業操業に対して激しいプロセス熱（通常100–600°C）が必要です。この熱はボイラー、炉、または直接燃焼によって供給される必要があり、未断熱容器および配管からの損失は無駄な燃料を表します。モジュール式脱着可能な断熱は、これらの損失を80～96%削減でき、表面を≤45°Cに冷却でき、回収期間は通常2年未満です。 重工業施設は、様々な熱集約的プロセス（ゴム、プラスチック、圧力容器）を実行します。プロセス熱を効率的に維持することは、コスト管理にとって重要です。
容量およびCO₂強度の比較はClimate TRACEの産業施設データから計算されました。セクターの役割は工学リファレンスに基づいています。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Xerox Corporation sits in a warm-summer humid continental climate zone (Köppen Dfb), at 43.2°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #206 largest of 338 manufacturing plants in United States by reported capacity.
Coordinates 43.22783, -77.41153. View on OpenStreetMap.
A other manufacturing like this runs hot equipment that sheds heat continuously: process heaters, ovens, steam lines, hot-water systems, valves & flanges (surface/process temperatures around 80–300 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,200 MWh/yr (≈ 250 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.
Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
Xerox Corporation is a other manufacturing in United States. It runs heavy manufacturing processes (rubber, plastics and allied products).
Xerox Corporation has a reported capacity of 1 unitless.
Xerox Corporation emits about 28,626 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 6,673 cars. That ranks #1461 among tracked facilities in United States.
Xerox Corporation is in United States, near coordinates 43.22783, -77.41153.
