Verdalskalk Hylla

Verdalskalk Hylla is a lime plant in Norway with a reported capacity of 24,867 t of lime. It calcines limestone into quicklime in high-temperature kilns. By capacity it ranks #4 of 4 lime plants tracked in Norway. It emits about 76,331 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 17,793 cars. Its CO₂ per unit of capacity is about 366% above the median lime plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38467601.

文脈内で：この施設がどのように比較されるか

24,867 t of limeで、Verdalskalk HyllaはNorwayのlime plantの中央値以下 45,005 t of limeです。 サブセクター：lime。 lime plantとして、その中核的な産業操業に対して激しいプロセス熱（通常600–900°C）が必要です。この熱はボイラー、炉、または直接燃焼によって供給される必要があり、未断熱容器および配管からの損失は無駄な燃料を表します。モジュール式脱着可能な断熱は、これらの損失を80～96%削減でき、表面を≤45°Cに冷却でき、回収期間は通常2年未満です。 石灰工場は800～900°Cの高温キルンでセメント石を焙焼し、高温の生石灰は、水分との反応を防ぐために断熱容器で取り扱う必要があります。

容量およびCO₂強度の比較はClimate TRACEの産業施設データから計算されました。セクターの役割は工学リファレンスに基づいています。

What 76,331 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest lime plants in Norway

Reported capacity (t of lime), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Verdalskalk Hylla sits in a subarctic (boreal) climate zone (Köppen Dfc), at 63.8°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #4 largest of 4 lime plants in Norway by reported capacity.

Nearby industrial sites

• Norfrakalk · Lime Plant · 167,177 t CO₂
• MM FOLLACELL Pulp Mill · Pulp & Paper Mill · 70,255 t CO₂
• Elkem Thamshavn · Metals Plant · 277,000 t CO₂

Location

Coordinates 63.8383, 11.37948. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions