Metals Plant in United States. Approximate location 42.24228, -89.09283.
Metals PlantUnited StatesCO₂ reported
Gunite Corporation is a non-ferrous metals plant in United States with a reported capacity of 1 unitless. It smelts or refines non-ferrous metals. By capacity it ranks #112 of 330 non-ferrous metals plants tracked in United States. It emits about 51,596 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 12,027 cars. Its CO₂ per unit of capacity is about 12% above the median non-ferrous metals plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673365.
1 unitlessで、Gunite CorporationはUnited Statesのnon-ferrous metals plantの中央値約 1 unitlessです。 容量あたりのCO₂は、non-ferrous metals plantの中央値上約38%です。 サブセクター：other-metals。 non-ferrous metals plantとして、その中核的な産業操業に対して激しいプロセス熱（通常400–1200°C）が必要です。この熱はボイラー、炉、または直接燃焼によって供給される必要があり、未断熱容器および配管からの損失は無駄な燃料を表します。モジュール式脱着可能な断熱は、これらの損失を80～96%削減でき、表面を≤45°Cに冷却でき、回収期間は通常2年未満です。 非鉄金属工場は、融点以上の炉および坩堝で金属を溶融、精製および鋳造します。未断熱転送および保有容器からの損失は重要です。
容量およびCO₂強度の比較はClimate TRACEの産業施設データから計算されました。セクターの役割は工学リファレンスに基づいています。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Gunite Corporation sits in a hot-summer humid continental climate zone (Köppen Dfa), at 42.2°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #112 largest of 330 non-ferrous metals plants in United States by reported capacity.
Coordinates 42.24228, -89.09283. View on OpenStreetMap.
A non-ferrous metals plant like this runs hot equipment that sheds heat continuously: furnaces, ladles, heat-treatment ovens, ducting & valves (surface/process temperatures around 150–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,700 MWh/yr (≈ 330 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.
Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
Gunite Corporation is a non-ferrous metals plant in United States. It smelts or refines non-ferrous metals.
Gunite Corporation has a reported capacity of 1 unitless.
Gunite Corporation emits about 51,596 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 12,027 cars. That ranks #1004 among tracked facilities in United States.
Gunite Corporation is in United States, near coordinates 42.24228, -89.09283.
