Gladstone Region

Gladstone Region is an aluminium smelter in Australia with a reported capacity of 1,583,016 t of alumina/aluminum. It smelts alumina into primary aluminium by high-current electrolysis. By capacity it ranks #6 of 15 aluminium smelters tracked in Australia. It emits about 2,076,521 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 484,038 cars. Its CO₂ per unit of capacity is about 37% below the median aluminium smelter.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3672950.

文脈内で：この施設がどのように比較されるか

1,583,016 t of alumina/aluminumで、Gladstone RegionはAustraliaのaluminium smelterの中央値はるかに上 974,163 t of alumina/aluminumです。 サブセクター：aluminum。 aluminium smelterとして、その中核的な産業操業に対して激しいプロセス熱（通常600–900°C）が必要です。この熱はボイラー、炉、または直接燃焼によって供給される必要があり、未断熱容器および配管からの損失は無駄な燃料を表します。モジュール式脱着可能な断熱は、これらの損失を80～96%削減でき、表面を≤45°Cに冷却でき、回収期間は通常2年未満です。 アルミニウム製錬所は大きな電流を使用して、900°C以上の溶融アルミニウムにアルミナを精製し、高温金属は坩堝および鋳造装置を通じて流れなければなりません。

容量およびCO₂強度の比較はClimate TRACEの産業施設データから計算されました。セクターの役割は工学リファレンスに基づいています。

What 2,076,521 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest aluminium smelters in Australia

Reported capacity (t of alumina/aluminum), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Gladstone Region sits in a humid subtropical climate zone (Köppen Cfa), at 23.9°S in the southern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #6 largest of 15 aluminium smelters in Australia by reported capacity.

Nearby industrial sites

• Boyne Island aluminium plant · Aluminium Smelter · 1,072,034 t CO₂
• Yarwun Alumina Refinery · Aluminium Smelter · 4,459,950 t CO₂
• Gladstone Cement Plant · Cement Plant · 362,639 t CO₂

Location

Coordinates -23.92813, 151.63682. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions