Chemical Plant in United States. Approximate location 33.94516, -78.00117.
Chemical PlantUnited StatesCO₂ reported
ADM Southport is a chemical plant in United States with a reported capacity of 1 unitless. It manufactures industrial and specialty chemicals. By capacity it ranks #240 of 453 chemical plants tracked in United States. It emits about 65,373 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 15,238 cars. Its CO₂ per unit of capacity is about 5464% above the median chemical plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3674391.
1 unitlessで、ADM SouthportはUnited Statesのchemical plantの中央値約 1 unitlessです。 容量あたりのCO₂は、chemical plantの中央値上約14%です。 サブセクター：other-chemicals。 chemical plantとして、その中核的な産業操業に対して激しいプロセス熱（通常100–500°C）が必要です。この熱はボイラー、炉、または直接燃焼によって供給される必要があり、未断熱容器および配管からの損失は無駄な燃料を表します。モジュール式脱着可能な断熱は、これらの損失を80～96%削減でき、表面を≤45°Cに冷却でき、回収期間は通常2年未満です。 化学工場は、広範な工業および特殊化学物質を生産します。多くの物質は反応および分離のための正確な温度制御および持続された熱入力を必要とします。
容量およびCO₂強度の比較はClimate TRACEの産業施設データから計算されました。セクターの役割は工学リファレンスに基づいています。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of chemical), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
ADM Southport sits in a humid subtropical climate zone (Köppen Cfa), at 33.9°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #240 largest of 453 chemical plants in United States by reported capacity.
Coordinates 33.94516, -78.00117. View on OpenStreetMap.
A chemical plant like this runs hot equipment that sheds heat continuously: reactors, crackers, distillation columns, heat exchangers, steam lines, valves & flanges (surface/process temperatures around 150–500 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 9,600 MWh/yr (≈ 1,900 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.
Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
ADM Southport is a chemical plant in United States. It manufactures industrial and specialty chemicals.
ADM Southport has a reported capacity of 1 unitless.
ADM Southport emits about 65,373 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 15,238 cars. That ranks #865 among tracked facilities in United States.
ADM Southport is in United States, near coordinates 33.94516, -78.00117.
