Metals Plant in United States. Approximate location 41.60872, -87.33722.
Metals PlantUnited StatesCO₂ reported
Cleveland-Cliffs Burns Harbor, LLC - Gary Plate is a non-ferrous metals plant in United States with a reported capacity of 1 unitless. It smelts or refines non-ferrous metals. By capacity it ranks #288 of 330 non-ferrous metals plants tracked in United States. It emits about 10,380 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 2,420 cars. Its CO₂ per unit of capacity is about 77% below the median non-ferrous metals plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673245.
Con 1 unitless, Cleveland-Cliffs Burns Harbor, LLC - Gary Plate è attorno a la mediana di non-ferrous metals plant in United States (1 unitless). Il suo CO₂ per unità di capacità è approssimativamente 72% al di sotto di la mediana di non-ferrous metals plant. Sottosettore: other-metals. Come non-ferrous metals plant, richiede calore di processo intenso (tipicamente 400–1200°C) per le sue operazioni industriali essenziali — calore che deve essere fornito da caldaie, forni o combustione diretta, e le perdite attraverso recipienti e tubazioni non isolati rappresentano carburante sprecato. L'isolamento modulare removibile può ridurre queste perdite dell'80–96%, raffreddando superfici a ≤45°C, con payback spesso inferiore a 2 anni. Gli impianti di metalli non ferrosi fondono, raffinano e colano metalli in forni e crogioli sopra i loro punti di fusione; le perdite dai trasferimenti non isolati e dai recipienti di stoccaggio sono significative.
Confronto di capacità e intensità di CO₂ calcolato dai dati delle strutture industriali Climate TRACE; ruolo del settore basato su riferimento ingegneristico.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Cleveland-Cliffs Burns Harbor, LLC - Gary Plate sits in a hot-summer humid continental climate zone (Köppen Dfa), at 41.6°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #288 largest of 330 non-ferrous metals plants in United States by reported capacity.
Coordinates 41.60872, -87.33722. View on OpenStreetMap.
A non-ferrous metals plant like this runs hot equipment that sheds heat continuously: furnaces, ladles, heat-treatment ovens, ducting & valves (surface/process temperatures around 150–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,300 MWh/yr (≈ 270 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.
Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
Cleveland-Cliffs Burns Harbor, LLC - Gary Plate is a non-ferrous metals plant in United States. It smelts or refines non-ferrous metals.
Cleveland-Cliffs Burns Harbor, LLC - Gary Plate has a reported capacity of 1 unitless.
Cleveland-Cliffs Burns Harbor, LLC - Gary Plate emits about 10,380 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 2,420 cars. That ranks #1942 among tracked facilities in United States.
Cleveland-Cliffs Burns Harbor, LLC - Gary Plate is in United States, near coordinates 41.60872, -87.33722.
