Refinery in France. Approximate location 48.59059, 2.94514.
RefineryFrance
Total Grandpuits Refinery is a refinery in France. It processes crude oil into fuels and petrochemical feedstocks through distillation, cracking and reforming. It is operated by TotalEnergies SE.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3143888.
Sous-secteur: oil-and-gas-refining. Comme refinery, elle nécessite une chaleur de procédé intensive (typiquement 200–600°C) pour ses opérations industrielles essentielles — chaleur qui doit être fournie par des chaudières, fours ou combustion directe, et les pertes par les récipients et tuyauteries non isolés représentent du combustible gaspillé. L'isolation modulaire amovible peut réduire ces pertes de 80–96%, refroidissant les surfaces à ≤45°C, avec des délais d'amortissement souvent inférieurs à 2 ans. Les raffineries chauffent, fractionnent et transforment chimiquement le pétrole brut en combustibles et matières premières pétrochimiques par distillation et craquage gourmands en énergie — extrêmement exigeants pour la génération de vapeur et la récupération de chaleur.
Comparaison de capacité et d'intensité de CO₂ calculée à partir des données des installations industrielles Climate TRACE; rôle du secteur basé sur la référence d'ingénierie.
Reported capacity (BBL per day), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by TotalEnergies SE. All facilities by this operator →
Total Grandpuits Refinery sits in a temperate oceanic climate zone (Köppen Cfb), at 48.6°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
Coordinates 48.59059, 2.94514. View on OpenStreetMap.
A refinery like this runs hot equipment that sheds heat continuously: crude & vacuum distillation columns, fired heaters, heat exchangers, steam lines, valves & flanges (surface/process temperatures around 150–550 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 54,000 MWh/yr (≈ 11,000 t CO₂/yr) — the sector-typical mid-range (no per-site CO₂ reported). Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Energy-savings certificate premiums for efficiency works; 6th period from 1 Jan 2026 (+35% obligation, 1050 TWhc/yr).
Obligation. Now CONSUMPTION-based: if avg annual final energy >2.75 GWh over 3 yrs, mandatory regulatory energy audit; first audit for newly-covered sites by 11 Oct 2026. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
Total Grandpuits Refinery is a refinery in France. It processes crude oil into fuels and petrochemical feedstocks through distillation, cracking and reforming.
Total Grandpuits Refinery is in France, near coordinates 48.59059, 2.94514.
Total Grandpuits Refinery is operated by TotalEnergies SE.
