Mari Pulp and Paper Mill JSC - MARIPAPER / Mari PPM

Mari Pulp and Paper Mill JSC - MARIPAPER / Mari PPM is a pulp & paper mill in Russian Federation with a reported capacity of 50,000 t of pulp & paper. It turns wood or recovered fibre into pulp and paper, with large steam and drying loads. By capacity it ranks #6 of 6 pulp & paper mills tracked in Russian Federation. It emits about 27,021 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 6,299 cars.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-44375647.

En contexte: comment cette installation se compare

À 50,000 t of pulp & paper, Mari Pulp and Paper Mill JSC - MARIPAPER / Mari PPM est en dessous de la médiane des pulp & paper mill en Russian Federation (733,000 t of pulp & paper). Sous-secteur: pulp-and-paper. Comme pulp & paper mill, elle nécessite une chaleur de procédé intensive (typiquement 150–250°C) pour ses opérations industrielles essentielles — chaleur qui doit être fournie par des chaudières, fours ou combustion directe, et les pertes par les récipients et tuyauteries non isolés représentent du combustible gaspillé. L'isolation modulaire amovible peut réduire ces pertes de 80–96%, refroidissant les surfaces à ≤45°C, avec des délais d'amortissement souvent inférieurs à 2 ans. Les papeteries génèrent leur propre vapeur pour le procédé de cuisson et les sécheurs de papier, exploitant de grands systèmes de chaudières où la perte de chaleur réduit directement l'efficacité.

Comparaison de capacité et d'intensité de CO₂ calculée à partir des données des installations industrielles Climate TRACE; rôle du secteur basé sur la référence d'ingénierie.

What 27,021 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest pulp & paper mills in Russian Federation

Reported capacity (t of pulp & paper), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Mari Pulp and Paper Mill JSC - MARIPAPER / Mari PPM sits in a warm-summer humid continental climate zone (Köppen Dfb), at 55.9°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #6 largest of 6 pulp & paper mills in Russian Federation by reported capacity.

Nearby industrial sites

• Kazanorgsintez, Kazan · Petrochemical · 712,521 t CO₂
• Mariisky NPZ Mari El Refinery · Refinery · 550,072 t CO₂

Location

Coordinates 55.87228, 48.35685. View on OpenStreetMap.

Heat loss & insulation profile

A pulp & paper mill like this runs hot equipment that sheds heat continuously: digesters, dryers, evaporators, steam lines, hot-water systems (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 4,000 MWh/yr (≈ 800 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

External climate finance your country can access

Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:

• Japan JCM (Joint Crediting Mechanism) — Japan co-finances diffusion of decarbonising tech incl. INDUSTRIAL ENERGY EFFICIENCY in partner countries, in exchange for carbon credits. Channels: MOEJ model projects, ADB trust funds, NEDO demonstrations.
• UK International Climate Finance (ICF / ODA) — ~GBP 6bn ODA over 3 yrs; industrial-decarbonisation flows via Climate Investment Funds (CIF) - Clean Technology Fund.
• Green Climate Fund (GCF) + ADB / World Bank / UNIDO — Concessional finance & grants for industrial energy efficiency. E.g. GCF $200M ADB-led India Green Finance Facility; World Bank FP071 'Scaling Up Energy Efficiency for Industrial Enterprises in Vietnam'; ASEAN ACGF energy-efficiency revolving funds incl. SMEs.

Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.

Frequently asked questions