Cement Plant in United Kingdom. Approximate location 54.61937, -6.76823.
Cement PlantUnited KingdomCO₂ reported
Cookstown Cement Plant is a cement plant in United Kingdom with a reported capacity of 450,000 t of cement. It burns limestone in high-temperature rotary kilns to make clinker and cement. It is operated by Cookstown Cement Ltd. By capacity it ranks #10 of 10 cement plants tracked in United Kingdom. It emits about 195,844 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 45,651 cars. Its CO₂ per unit of capacity is about 21% above the median cement plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-32438466.
À 450,000 t of cement, Cookstown Cement Plant est en dessous de la médiane des cement plant en United Kingdom (1,000,000 t of cement). Son CO₂ par unité de capacité est approximativement 7% au-dessus de la médiane des cement plant. Sous-secteur: cement. Comme cement plant, elle nécessite une chaleur de procédé intensive (typiquement 800–1400°C) pour ses opérations industrielles essentielles — chaleur qui doit être fournie par des chaudières, fours ou combustion directe, et les pertes par les récipients et tuyauteries non isolés représentent du combustible gaspillé. L'isolation modulaire amovible peut réduire ces pertes de 80–96%, refroidissant les surfaces à ≤45°C, avec des délais d'amortissement souvent inférieurs à 2 ans. Les cimenteries chauffent le calcaire à 1.400°C dans des fours rotatifs — l'un des processus industriels les plus chauds — et doivent contrôler la température avec précision sur toute la longueur du four.
Comparaison de capacité et d'intensité de CO₂ calculée à partir des données des installations industrielles Climate TRACE; rôle du secteur basé sur la référence d'ingénierie.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of cement), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Cookstown Cement Ltd. All facilities by this operator →
Cookstown Cement Plant sits in a temperate oceanic climate zone (Köppen Cfb), at 54.6°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #10 largest of 10 cement plants in United Kingdom by reported capacity.
Coordinates 54.61937, -6.76823. View on OpenStreetMap.
A cement plant like this runs hot equipment that sheds heat continuously: rotary kiln shell, preheater tower, tertiary air duct & kiln hood, clinker-cooler ducts, valves (surface/process temperatures around 200–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
60% of cement CO2 is process calcination - NOT insulation-addressable; energy here is the fuel side only.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 8,200 MWh/yr (≈ 2,800 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Grants for industrial energy efficiency / deep decarbonization in England, Wales, NI; min grant lowered to GBP 75k for SMEs.
Obligation. Mandatory for 'large undertakings': >=250 employees OR turnover >GBP 36M and balance sheet >GBP 18M. Qualification date 31 Dec 2026; compliance notification by 5 Dec 2027. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
Cookstown Cement Plant is a cement plant in United Kingdom. It burns limestone in high-temperature rotary kilns to make clinker and cement.
Cookstown Cement Plant has a reported capacity of 450,000 t of cement.
Cookstown Cement Plant emits about 195,844 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 45,651 cars. That ranks #23 among tracked facilities in United Kingdom.
Cookstown Cement Plant is in United Kingdom, near coordinates 54.61937, -6.76823.
Cookstown Cement Plant is operated by Cookstown Cement Ltd.
