Other Manufacturing in United States. Approximate location 43.22783, -77.41153.
Other ManufacturingUnited StatesCO₂ reported
Xerox Corporation is an other manufacturing in United States with a reported capacity of 1 unitless. It runs heavy manufacturing processes (rubber, plastics and allied products). By capacity it ranks #206 of 338 manufacturing plants tracked in United States. It emits about 28,626 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 6,673 cars. Its CO₂ per unit of capacity is about 9% below the median other manufacturing.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3194486.
Con 1 unitless, Xerox Corporation está alrededor de la mediana de other manufacturing en United States (1 unitless). Su CO₂ por unidad de capacidad es aproximadamente 18% por debajo de la mediana de other manufacturing. Subsector: other-manufacturing. Como other manufacturing, requiere calor de proceso intenso (típicamente 100–600°C) para sus operaciones industriales centrales — calor que debe ser suministrado por calderas, hornos o combustión directa, y las pérdidas a través de recipientes y tuberías sin aislar representan combustible desperdiciado. El aislamiento modular desmontable puede reducir esas pérdidas en un 80–96%, enfriando superficies a ≤45°C, con amortización a menudo inferior a 2 años. Las instalaciones de manufactura pesada ejecutan una variedad de procesos intensivos en calor (caucho, plásticos, recipientes a presión); mantener el calor de proceso eficientemente es crítico para el control de costos.
Comparación de capacidad e intensidad de CO₂ calculada a partir de datos de instalaciones industriales de Climate TRACE; papel del sector basado en referencia de ingeniería.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Xerox Corporation sits in a warm-summer humid continental climate zone (Köppen Dfb), at 43.2°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #206 largest of 338 manufacturing plants in United States by reported capacity.
Coordinates 43.22783, -77.41153. View on OpenStreetMap.
A other manufacturing like this runs hot equipment that sheds heat continuously: process heaters, ovens, steam lines, hot-water systems, valves & flanges (surface/process temperatures around 80–300 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,200 MWh/yr (≈ 250 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.
Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
Xerox Corporation is a other manufacturing in United States. It runs heavy manufacturing processes (rubber, plastics and allied products).
Xerox Corporation has a reported capacity of 1 unitless.
Xerox Corporation emits about 28,626 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 6,673 cars. That ranks #1461 among tracked facilities in United States.
Xerox Corporation is in United States, near coordinates 43.22783, -77.41153.
