Steel Plant in China. Approximate location 39.03409, 117.4861.
Steel PlantChinaCO₂ reported
Tianjin Pipe Corporation is a steel plant in China with a reported capacity of 3,000,000 t of steel. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace). It is operated by Tianjin Pipe Corp. By capacity it ranks #120 of 363 steel plants tracked in China. It emits about 1,413,454 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 329,476 cars. Its CO₂ per unit of capacity is about 13% below the median steel plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-32440590.
Con 3,000,000 t of steel, Tianjin Pipe Corporation está muy por encima de la mediana de steel plant en China (2,300,000 t of steel). Su CO₂ por unidad de capacidad es aproximadamente 63% por debajo de la mediana de steel plant. Subsector: iron-and-steel. Como steel plant, requiere calor de proceso intenso (típicamente 800–1500°C) para sus operaciones industriales centrales — calor que debe ser suministrado por calderas, hornos o combustión directa, y las pérdidas a través de recipientes y tuberías sin aislar representan combustible desperdiciado. El aislamiento modular desmontable puede reducir esas pérdidas en un 80–96%, enfriando superficies a ≤45°C, con amortización a menudo inferior a 2 años. Las plantas de acero queman carbón en altos hornos o utilizan arcos eléctricos para fundir chatarra; en ambos casos el metal fundido debe mantenerse por encima de 1.500°C y transferirse a través de tuberías y recipientes calientes extensos.
Comparación de capacidad e intensidad de CO₂ calculada a partir de datos de instalaciones industriales de Climate TRACE; papel del sector basado en referencia de ingeniería.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of steel), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Tianjin Pipe Corp. All facilities by this operator →
Tianjin Pipe Corporation sits in a monsoon hot-summer continental climate zone (Köppen Dwa), at 39.0°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #120 largest of 363 steel plants in China by reported capacity.
Coordinates 39.03409, 117.4861. View on OpenStreetMap.
A steel plant like this runs hot equipment that sheds heat continuously: reheat & annealing furnaces, ladles, hot-blast stoves, steam & gas ducting (surface/process temperatures around 200–1,200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 4,500 MWh/yr (≈ 1,500 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Tianjin Pipe Corporation is a steel plant in China. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace).
Tianjin Pipe Corporation has a reported capacity of 3,000,000 t of steel.
Tianjin Pipe Corporation emits about 1,413,454 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 329,476 cars. That ranks #473 among tracked facilities in China.
Tianjin Pipe Corporation is in China, near coordinates 39.03409, 117.4861.
Tianjin Pipe Corporation is operated by Tianjin Pipe Corp.
