Steel Plant in China. Approximate location 40.94661, 117.7197.
Steel PlantChinaCO₂ reported
Chengde Iron and Steel Group Co Ltd is a steel plant in China with a reported capacity of 8,000,000 t of steel. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace). It is operated by Chengde Street Ltd. By capacity it ranks #24 of 363 steel plants tracked in China. It emits about 11,627,442 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 2,710,359 cars. Its CO₂ per unit of capacity is about 169% above the median steel plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1566514.
Con 8,000,000 t of steel, Chengde Iron and Steel Group Co Ltd está muy por encima de la mediana de steel plant en China (2,300,000 t of steel). Su CO₂ por unidad de capacidad es aproximadamente 14% por encima de la mediana de steel plant. Subsector: iron-and-steel. Como steel plant, requiere calor de proceso intenso (típicamente 800–1500°C) para sus operaciones industriales centrales — calor que debe ser suministrado por calderas, hornos o combustión directa, y las pérdidas a través de recipientes y tuberías sin aislar representan combustible desperdiciado. El aislamiento modular desmontable puede reducir esas pérdidas en un 80–96%, enfriando superficies a ≤45°C, con amortización a menudo inferior a 2 años. Las plantas de acero queman carbón en altos hornos o utilizan arcos eléctricos para fundir chatarra; en ambos casos el metal fundido debe mantenerse por encima de 1.500°C y transferirse a través de tuberías y recipientes calientes extensos.
Comparación de capacidad e intensidad de CO₂ calculada a partir de datos de instalaciones industriales de Climate TRACE; papel del sector basado en referencia de ingeniería.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of steel), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Chengde Street Ltd. All facilities by this operator →
Chengde Iron and Steel Group Co Ltd sits in a monsoon warm-summer continental climate zone (Köppen Dwb), at 40.9°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #24 largest of 363 steel plants in China by reported capacity.
Coordinates 40.94661, 117.7197. View on OpenStreetMap.
A steel plant like this runs hot equipment that sheds heat continuously: reheat & annealing furnaces, ladles, hot-blast stoves, steam & gas ducting (surface/process temperatures around 200–1,200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 8,800 MWh/yr (≈ 3,000 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Chengde Iron and Steel Group Co Ltd is a steel plant in China. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace).
Chengde Iron and Steel Group Co Ltd has a reported capacity of 8,000,000 t of steel.
Chengde Iron and Steel Group Co Ltd emits about 11,627,442 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 2,710,359 cars. That ranks #28 among tracked facilities in China.
Chengde Iron and Steel Group Co Ltd is in China, near coordinates 40.94661, 117.7197.
Chengde Iron and Steel Group Co Ltd is operated by Chengde Street Ltd.
