Cement Plant in China. Approximate location 26.61601, 107.24129.
Cement PlantChinaCO₂ reported
Guiding Conch Panjiang Cement Co Ltd Cement Plant is a cement plant in China with a reported capacity of 4,400,000 t of cement. It burns limestone in high-temperature rotary kilns to make clinker and cement. It is operated by Guiding Conch Panjiang Cement Co Ltd. By capacity it ranks #66 of 739 cement plants tracked in China. It emits about 1,454,381 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 339,017 cars. Its CO₂ per unit of capacity is about 8% below the median cement plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-32437364.
Bei 4,400,000 t of cement ist Guiding Conch Panjiang Cement Co Ltd Cement Plant deutlich über dem Medianwert von cement plant in China (2,000,000 t of cement). Sein CO₂ pro Kapazitätseinheit liegt ungefähr 8% unter dem Medianwert von cement plant. Untersektor: cement. Als cement plant benötigt es intensive Prozesswärme (typischerweise 800–1400°C) für seinen Kernbetrieb — Wärme, die durch Dampfkessel, Öfen oder direkte Verbrennung geliefert werden muss, und Verluste durch ungedämmte Behälter und Rohrleitungen stellen verschwendeten Brennstoff dar. Modulare abnehmbare Dämmung kann diese Verluste um 80–96% senken, Oberflächen auf ≤45°C kühlen, mit Amortisationszeiten oft unter 2 Jahren. Zementanlagen erhitzen Kalkstein auf 1.400°C in Drehrohröfen — einer der heißesten Industrieprozesse — und müssen die Temperatur über die gesamte Ofenlänge präzise kontrollieren.
Vergleich von Kapazität und CO₂-Intensität berechnet aus Climate TRACE Industrieanlagendaten; Sektorrolle basierend auf Ingenieurreferenz.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of cement), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Guiding Conch Panjiang Cement Co Ltd. All facilities by this operator →
Guiding Conch Panjiang Cement Co Ltd Cement Plant sits in a humid subtropical climate zone (Köppen Cfa), at 26.6°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #66 largest of 739 cement plants in China by reported capacity.
Coordinates 26.61601, 107.24129. View on OpenStreetMap.
A cement plant like this runs hot equipment that sheds heat continuously: rotary kiln shell, preheater tower, tertiary air duct & kiln hood, clinker-cooler ducts, valves (surface/process temperatures around 200–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
60% of cement CO2 is process calcination - NOT insulation-addressable; energy here is the fuel side only.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 19,000 MWh/yr (≈ 6,300 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Guiding Conch Panjiang Cement Co Ltd Cement Plant is a cement plant in China. It burns limestone in high-temperature rotary kilns to make clinker and cement.
Guiding Conch Panjiang Cement Co Ltd Cement Plant has a reported capacity of 4,400,000 t of cement.
Guiding Conch Panjiang Cement Co Ltd Cement Plant emits about 1,454,381 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 339,017 cars. That ranks #462 among tracked facilities in China.
Guiding Conch Panjiang Cement Co Ltd Cement Plant is in China, near coordinates 26.61601, 107.24129.
Guiding Conch Panjiang Cement Co Ltd Cement Plant is operated by Guiding Conch Panjiang Cement Co Ltd.
