Cement Plant in Malaysia. Approximate location 6.51305, 100.25751.
Cement PlantMalaysiaCO₂ reported
Cement Industries Perlis Cement Plant is a cement plant in Malaysia with a reported capacity of 2,000,000 t of cement. It burns limestone in high-temperature rotary kilns to make clinker and cement. It is operated by Negeri Sembilan Cement Industries Sdn Bhd. By capacity it ranks #7 of 12 cement plants tracked in Malaysia. It emits about 744,790 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 173,611 cars.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1897552.
Bei 2,000,000 t of cement ist Cement Industries Perlis Cement Plant etwa um dem Medianwert von cement plant in Malaysia (2,300,000 t of cement). Untersektor: cement. Als cement plant benötigt es intensive Prozesswärme (typischerweise 800–1400°C) für seinen Kernbetrieb — Wärme, die durch Dampfkessel, Öfen oder direkte Verbrennung geliefert werden muss, und Verluste durch ungedämmte Behälter und Rohrleitungen stellen verschwendeten Brennstoff dar. Modulare abnehmbare Dämmung kann diese Verluste um 80–96% senken, Oberflächen auf ≤45°C kühlen, mit Amortisationszeiten oft unter 2 Jahren. Zementanlagen erhitzen Kalkstein auf 1.400°C in Drehrohröfen — einer der heißesten Industrieprozesse — und müssen die Temperatur über die gesamte Ofenlänge präzise kontrollieren.
Vergleich von Kapazität und CO₂-Intensität berechnet aus Climate TRACE Industrieanlagendaten; Sektorrolle basierend auf Ingenieurreferenz.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of cement), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Negeri Sembilan Cement Industries Sdn Bhd. All facilities by this operator →
Cement Industries Perlis Cement Plant sits in a tropical monsoon climate zone (Köppen Am), at 6.5°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #7 largest of 12 cement plants in Malaysia by reported capacity.
Coordinates 6.51305, 100.25751. View on OpenStreetMap.
A cement plant like this runs hot equipment that sheds heat continuously: rotary kiln shell, preheater tower, tertiary air duct & kiln hood, clinker-cooler ducts, valves (surface/process temperatures around 200–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
60% of cement CO2 is process calcination - NOT insulation-addressable; energy here is the fuel side only.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 13,000 MWh/yr (≈ 4,300 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Cement Industries Perlis Cement Plant is a cement plant in Malaysia. It burns limestone in high-temperature rotary kilns to make clinker and cement.
Cement Industries Perlis Cement Plant has a reported capacity of 2,000,000 t of cement.
Cement Industries Perlis Cement Plant emits about 744,790 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 173,611 cars. That ranks #24 among tracked facilities in Malaysia.
Cement Industries Perlis Cement Plant is in Malaysia, near coordinates 6.51305, 100.25751.
Cement Industries Perlis Cement Plant is operated by Negeri Sembilan Cement Industries Sdn Bhd.
