Home / Asia / Japan / Textile mills / Suzuki Kutsushita Co., Ltd.

Suzuki Kutsushita Co., Ltd.

Textiles in Japan. Approximate location 34.57776, 135.75802.

TextilesJapanCO₂ reported

Suzuki Kutsushita Co., Ltd. is a textile mill in Japan with a reported capacity of 24,062,284 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #1 of 64 textile mills tracked in Japan. It emits about 630 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 147 cars.

630t CO₂e / yr (Climate TRACE)
#137CO₂ rank in Japan

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38472598.

في السياق: كيف يتم مقارنة هذا المنشأة

عند 24,062,284 USD، يكون Suzuki Kutsushita Co., Ltd. حوالي متوسط textile mill في Japan (24,062,284 USD). القطاع الفرعي: textiles-leather-apparel. كـ textile mill، يتطلب حرارة عملية مكثفة (عادة 60–150°C) لعملياته الصناعية الأساسية — حرارة يجب توفيرها بواسطة الغلايات أو الأفران أو الاحتراق المباشر، والخسائر من خلال الحاويات والأنابيب غير المعزولة تمثل وقود مهدر. يمكن للعزل المعياري القابل للإزالة أن يقلل هذه الخسائر بمقدار 80-96٪، وتبريد الأسطح إلى ≤45°C، مع فترة استرجاع غالباً أقل من سنتين. تستخدم مصانع النسيج بخار العملية للصباغة والتشطيب والتجفيف، غالباً ما تتطلب تحكماً دقيقاً بدرجة الحرارة على فترات تشغيل طويلة — يؤدي فقدان الحرارة المستمر إلى تآكل الأرباح.

مقارنة السعة وكثافة CO₂ محسوبة من بيانات منشآت Climate TRACE الصناعية؛ دور القطاع بناءً على مرجع الهندسة.

What 630 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

147cars driven for a year
82homes' annual energy use
10,500tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Japan

Suzuki Kutsushita Co., Ltd.: 24,062,284 USD24.1MSuzuki Kut…Yamagata Mitsubishi Pencil Precision Co.,Ltd.: 24,062,284 USD24.1MYamagata M…Kanko Apparel Co.,Ltd. Hakuta Factory: 24,062,284 USD24.1MKanko Appa…Kitai Co., Ltd: 24,062,284 USD24.1MKitai Co.…Mitsubishi Pencil Co.,Ltd. Gunma Factory: 24,062,284 USD24.1MMitsubishi…Kanko Apprel Co.,Ltd. Houki Factory: 24,062,284 USD24.1MKanko Appr…Kanko Apparel Co.,Ltd. Ohda Factory: 24,062,284 USD24.1MKanko Appa…Monoro, Incorporated: 24,062,284 USD24.1MMonoro, In…

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Suzuki Kutsushita Co., Ltd. sits in a humid subtropical climate zone (Köppen Cfa), at 34.6°N in the northern hemisphere.

~18°Ctypical annual mean
~27°Ctypical warm-season
Humid subtropical: hot summers and mild winters

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #1 largest of 64 textile mills in Japan by reported capacity.

Nearby industrial sites

Location

Coordinates 34.57776, 135.75802. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 620 MWh/yr (≈ 120 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

Japan: funding & obligation

Funding. Subsidies to cut upfront cost of energy-saving equipment for industry/commercial; some tied to 'specified business operator' status + S/A benchmark class.

Obligation. Factories/operators with large energy use are designated 'specified business operators': must appoint energy managers, report, and file mid-to-long-term efficiency plans. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions

What type of facility is Suzuki Kutsushita Co., Ltd.?

Suzuki Kutsushita Co., Ltd. is a textile mill in Japan. It spins, dyes and finishes textiles, leather or apparel using process steam.

What is the capacity of Suzuki Kutsushita Co., Ltd.?

Suzuki Kutsushita Co., Ltd. has a reported capacity of 24,062,284 USD.

How much CO₂ does Suzuki Kutsushita Co., Ltd. emit?

Suzuki Kutsushita Co., Ltd. emits about 630 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 147 cars. That ranks #137 among tracked facilities in Japan.

Where is Suzuki Kutsushita Co., Ltd. located?

Suzuki Kutsushita Co., Ltd. is in Japan, near coordinates 34.57776, 135.75802.

Built from open public data; no personal information. Operate this site? Request a correction or removal.