We model any hot equipment in 3D — bare vs insulated — cost the loss in €, kWh and CO₂, and hand you the story. You bring decarbonisation, fuel savings and ≤45 °C worker safety to accounts you already own.
Your clients want energy efficiency, decarbonisation and heat-stress protection. We hand you the engineered answer — and the margin for bringing it.
Agents & contractors earn a flexible % on every sale of our products and services. Just know the right person at a plant? A single warm introduction earns a finder's fee — we do the rest. OEMs add a high-margin, co-branded retrofit line.
→ / 02We're the engineering behind you — supply, 3D modelling and M&V. You keep the relationship.
→ / 03Lower energy bills and CO₂ emissions — payback under 2 years.
→ / 04Touch-safe surfaces — an EHS argument.
→ / 05At your factory or the client's site, before any roll-out.
→Modular panels with snap fasteners, fitted over live boilers — touch-safe ≤45 °C, off and back on in minutes for every maintenance cycle.
Send drawings or photos — we build the equipment in 3D.
ASTM C680 — kWh, € and CO₂ per component. Auditable and grant-grade — ready for government grant applications (BAFA, IETF, white certificates).
A model anyone reads in seconds and can propose fixes on.
At your factory or the client site — measured with before/after thermography.
Scale the plant; the saving lands in their SECR / CSRD / CBAM report.
References on request.
See our work at inzonex.co.uk/cases. Need proof for your client? Contact us and we'll connect you with engineer references — local, regional and global — at major manufacturers who have used Inzonex.
Request referencesMade in Ukraine with EU-grade materials — 0% EU import duty (DCFTA) is how we hold ordinary insulation-jacket pricing on engineered, serviceable covers.
Available for shipping and installation in any region — sea freight to North America, Asia and MENA in 4–6 weeks; the production cycle scales with order volume.
vs traditional aluminium-clad rigid lagging — far easier to handle and re-fit, less structural load on the equipment.
swap the insulation core without rebuilding the cover — extends the lifetime of the cover.
temperature-tiered build — rated for surfaces up to +600 °C.
Tell us who you work with. We model your first piece of equipment in 3D — bare vs insulated, the loss costed in €, kWh and CO₂ — and send the partner-pack.
We've opened a pre-filled email to contact@inzonex.co.uk. Attach your drawings or photos and hit send — we reply with your 3D model and partner-pack.