São Luís Municipality

São Luís Municipality is an aluminium smelter in Brazil with a reported capacity of 4,134,539 t of alumina/aluminum. It smelts alumina into primary aluminium by high-current electrolysis. By capacity it ranks #1 of 6 aluminium smelters tracked in Brazil. It emits about 6,865,403 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,600,327 cars. Its CO₂ per unit of capacity is about 21% below the median aluminium smelter.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3672956.

在上下文中：该设施如何比较

在4,134,539 t of alumina/aluminum时，São Luís Municipality是Brazil中aluminium smelter的中位数远高于 480,000 t of alumina/aluminum。 其单位容量的CO₂约为aluminium smelter中位数的低于 26%。 子部门：aluminum。 作为aluminium smelter，它需要强烈的工艺热量（通常600–900°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 铝冶炼厂使用大电流将氧化铝精炼成900°C以上的熔融铝，热金属必须通过坩埚和铸造设备流动。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 6,865,403 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest aluminium smelters in Brazil

Reported capacity (t of alumina/aluminum), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

São Luís Municipality sits in a tropical savanna climate zone (Köppen Aw), at 2.6°S in the southern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #1 largest of 6 aluminium smelters in Brazil by reported capacity.

Nearby industrial sites

• São Luis aluminium plant · Aluminium Smelter · 1,045,013 t CO₂
• Sao Luis Alumina Refinery and Aluminum Smelter · Aluminium Smelter · 6,392,925 t CO₂
• Fenix Industria Textil Ltda · Textiles · 302 t CO₂

Location

Coordinates -2.61189, -44.31483. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions