Home / South America / Brazil / Textile mills / Lynd Calçados Ltda

Lynd Calçados Ltda

Textiles in Brazil. Approximate location -19.87558, -45.0019.

TextilesBrazilCO₂ reported

Lynd Calçados Ltda is a textile mill in Brazil with a reported capacity of 19,302,191 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #807 of 1,732 textile mills tracked in Brazil. It emits about 302 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 70 cars.

302t CO₂e / yr (Climate TRACE)
#1465CO₂ rank in Brazil

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38480003.

在上下文中:该设施如何比较

在19,302,191 USD时,Lynd Calçados Ltda是Brazil中textile mill的中位数约 19,302,191 USD。 子部门:textiles-leather-apparel。 作为textile mill,它需要强烈的工艺热量(通常60–150°C)来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量,通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%,将表面冷却至≤45°C,投资回收期通常不到2年。 纺织厂使用工艺蒸汽进行染色、整理和干燥,通常需要在长时间运行期间进行严格的温度控制——持续的热损失会侵蚀利润。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出;部门角色基于工程参考。

What 302 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

70cars driven for a year
39homes' annual energy use
5,033tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Brazil

Elaine Cristina Dos Reis Pinto: 19,302,191 USD19.3MElaine Cri…Aguia Confeccao Do Vestuario Ltda: 19,302,191 USD19.3MAguia Conf…Tegape Quimica Ltda: 19,302,191 USD19.3MTegape Qui…Mar & Mar Confeccoes Eireli Ё Me: 19,302,191 USD19.3MMar & Mar …Florismar Textil Ltda: 19,302,191 USD19.3MFlorismar …Confeccoes Tangaroa Ltda: 19,302,191 USD19.3MConfeccoes…Cotelav - Confeccoes E Lavanderia Limitada: 19,302,191 USD19.3MCotelav - …Fitas Elasticas Estrela Ltda: 19,302,191 USD19.3MFitas Elas…

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Lynd Calçados Ltda sits in a tropical savanna climate zone (Köppen Aw), at 19.9°S in the southern hemisphere.

~26°Ctypical annual mean
~29°Ctypical warm-season
Tropical savanna: warm all year, with distinct wet and dry seasons

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #807 largest of 1732 textile mills in Brazil by reported capacity.

Nearby industrial sites

Location

Coordinates -19.87558, -45.0019. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 500 MWh/yr (≈ 100 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

External climate finance your country can access

Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:

CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.

Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.

Frequently asked questions

What type of facility is Lynd Calçados Ltda?

Lynd Calçados Ltda is a textile mill in Brazil. It spins, dyes and finishes textiles, leather or apparel using process steam.

What is the capacity of Lynd Calçados Ltda?

Lynd Calçados Ltda has a reported capacity of 19,302,191 USD.

How much CO₂ does Lynd Calçados Ltda emit?

Lynd Calçados Ltda emits about 302 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 70 cars. That ranks #1465 among tracked facilities in Brazil.

Where is Lynd Calçados Ltda located?

Lynd Calçados Ltda is in Brazil, near coordinates -19.87558, -45.0019.

Built from open public data; no personal information. Operate this site? Request a correction or removal.